-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -

Create an account on the HP Community to personalize your profile and ask a question
02-09-2024 12:56 PM
Hello!!!
I want to upgrade the HP PAVILION W4N42EA, HP 250 G5.
Would you write me, please:
1. A valid type of SSD 256GB hard drive;
2. The maximum RAM DIMM (per slot and full) and allowed type (frequency, volume GB ets.).
Thank you!
Solved! Go to Solution.
Accepted Solutions
02-10-2024 10:30 AM - edited 02-10-2024 10:32 AM
Compatible SSD (up to 2 TB)
M.2 SATA-3 interface with triple-level cell (TLC) technology
2.5" SATA-3 7mm SSD to replace the legacy HDD
Maximum installed memory
16GB maximum installed
Preferred upgrade memory type and specification
DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX8 1.2V 260-pin 8Gbit
Modules must be installed as an identical pair for Dual Channel mode operation
I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
02-10-2024 10:30 AM - edited 02-10-2024 10:32 AM
Compatible SSD (up to 2 TB)
M.2 SATA-3 interface with triple-level cell (TLC) technology
2.5" SATA-3 7mm SSD to replace the legacy HDD
Maximum installed memory
16GB maximum installed
Preferred upgrade memory type and specification
DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX8 1.2V 260-pin 8Gbit
Modules must be installed as an identical pair for Dual Channel mode operation
I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"