Vorrei potenziare il mio notebook , RAM e Processore

[adri90]

salve ,ho un HP 15 notebook pc , vorrei potenziare la mia RAM (ha solo 4gb) e non so quante slot posso aggiungere (un programma mi dice 1 vuota) ne quali ram sono compatibili,posso mettere  Ram piu grandi?  mi date una mano?

inoltre vorrei potenziare il processore, se conviene.

ecco le specifiche attuali:

cpu attuale: Intel Core i5-4210U CPU @ 1.70GHz

ram attuale : 4,00GB Single-Channel DDR3 @ 798MHz (11-11-11-28)

scheda madre: Hewlett-Packard 2212 (U3E1),Manufacturer Hewlett-Packard,

Version 86.52
Chipset Vendor Intel
Chipset Model Haswell-ULT
Chipset Revision 0B
Southbridge Vendor Intel
Southbridge Model H8x/P8x
Southbridge Revision C1

[Paul_Tikkanen]

Hi:

Any Intel processor ending in a 'U' is an integral part of the motherboard and cannot be upgraded unless you replace the motherboard with one listed in chapter 3 of your notebook's service manual that may come with a better processor.

c04438537 (hp.com)

This is usually very expensive if you can even find a motherboard, and not worth the return on investment.

The 12 GB max memory specification listed in chapter 1 of the manual is incorrect.

Your notebook supports 2 x 8 GB of DDR3L memory.

This would be a compatible 8 GB memory chip...

Crucial RAM CT102464BF160B 8GB DDR3L-1600 SODIMM Memoria Laptop 1.35 V CL11 : Amazon.it: Informatica

[MayS · Accepted solution]

Hi @adri90 ! 

Thank you for visiting our English HP Support Community.

We advise you to post your question in English to insure a quick response for the Community. This can also help other users to take advantage of your post, in the case they have the same question.

Thank you for your understanding.

@Paul_Tikkanen thank you for helping! 🙂

Regards,
MayS. 

[adri90]

thank you.
but I know that the RAM in slot2 must be equal in size to that of slot1 (in this case 4gb), or is the one you listed okay?

[Paul_Tikkanen]

You're very welcome.

You can add the 8 GB Crucial memory chip in the empty slot alongside the existing 4 GB memory chip.

You would then have 12 GB of memory running in single channel mode.

You would need to install 2 x 8 GB of memory for it to run in the higher performing dual channel mode.

If you only want to add another 4 GB memory chip in the empty slot, then you would use this one instead...

Crucial RAM CT51264BF160B 4GB DDR3 1600 MHz CL11 Memoria Laptop : Amazon.it: Informatica

Then you would have 8 GB of memory running in dual channel mode.

Memory has to be installed in matching capacities for the memory to run in dual channel mode (2 x 4 GB, 2 x 8 GB).