a8-3510mx

[Echo_Lake]

@GTSPORTCROWN
I am glad to know that you managed to resolve the issue. Please reach out again for any further assistance.
Have a nice day ahead.

[GTSPORTCROWN]

[GTSPORTCROWN]

Another option I found. like this ...

I mean, it turned out to be a dead processor

[Echo_Lake]

@GTSPORTCROWN
Its recommended not to change or modify motherboard components, I would suggest next time when you go for purchase choose CTO (HP configure-to-order) which will give you the option to customize the computer hardware according to your need.

[GTSPORTCROWN]

I bought the CPU, it was dead, I spent two weeks figuring out that he was dead, because in those descriptions does not say anything about support, but I showed a photo where MX processor running at G6 body. moreover, it turned out that any motherboard has support for this processor, thanks to the latest photos. this processor will allow me to run memory at a higher speed than the a8-3520m. the memory controller runs on a 12800 MX processor. on my 10600, that's the whole point, that's the difference, You did not help me in this matter

[GTSPORTCROWN]

not only that, all descriptions say that 8 gigabytes is the maximum for this laptop, but it is not, you can install 12 gigabytes(8GB and 4GB) and 16 gigabytes(8GB and 8GB) of memory is relatively safe

[GTSPORTCROWN]

1. 

[Echo_Lake]

@GTSPORTCROWN
I understand the difficulty with the problem and my support boundaries in the support community is limited. 

HP does not recommend to use Third party hardware/software as they are not tested by HP and may not be accurate. 

[GTSPORTCROWN]

[GTSPORTCROWN]

it's my complectation today, I bought another CPU, the memory not ran at 800 MHz, 667 MHz maximum