• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
Hp pavilion 14-ce0014ns

Hello, I´ve seen that there is gap for a hardrive in the computer, i want to know the spare part number of those to install the harddrive in the laptop, I also need the spare part of the need screw to install it to the motherboard.

It´s urgent so any help will be appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

The hard drive bracket is available using spare part number L19469-001. The hard drive cable is available using
spare part number L19172-001

 

Service Manual download 

 

See p. 64

 

https://www.amazon.de/Ersatzteil-Inc-HDD-Cable-L19172-001/dp/B07P9F9B4C/ref=sr_1_1?__mk_de_DE=%C3%85...

 

The cable is absolutely necessary; the bracket/caddy can be replaced with a generic set of 2.5 inch rubber mounting rails. 

 

Remove the two Phillips M2.0×4.0 screws

 

The screws are not sold as a replacement part but should be available at any good hardware store. 

 

Please accept as solution if this is the info you needed. 

 

 

View solution in original post

3 REPLIES 3
HP Recommended

The hard drive bracket is available using spare part number L19469-001. The hard drive cable is available using
spare part number L19172-001

 

Service Manual download 

 

See p. 64

 

https://www.amazon.de/Ersatzteil-Inc-HDD-Cable-L19172-001/dp/B07P9F9B4C/ref=sr_1_1?__mk_de_DE=%C3%85...

 

The cable is absolutely necessary; the bracket/caddy can be replaced with a generic set of 2.5 inch rubber mounting rails. 

 

Remove the two Phillips M2.0×4.0 screws

 

The screws are not sold as a replacement part but should be available at any good hardware store. 

 

Please accept as solution if this is the info you needed. 

 

 

HP Recommended

Hello Huffer.

can you post a link to a generic 2.5 inch rubber mounting rails, i will be so grateful.

HP Recommended
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.