can i update my components the same way?

[Chaskone]

I have an hp laptop with an 82f6 motherboard and when I looked for it I came to this site https://support.hp.com/ph-en/document/c05254568 , but I came out that it was the motherboard of a pc and not a laptop, I was interested in knowing if I could update my components in the same way that appears there. Thanks

[erico]

Hi @Chaskone ,

Please rephrase your question.  Unless you are more specific, what you want to do isn't clear.

Which components are you asking about?

HP laptops must be identified by use of an HP product number or product name, not by an motherboard designation.

[Chaskone]

sorry for not specifying it, the components that I want to update are (ram, processor, ssd)
product number:
LAPTOP-7R8R21UI

[mike_coreit]

The motherboard ID 0x82F6 is listed alongside laptop and desktop series in this driver compatibility list:

http://ftp.hp.com/pub/softpaq/sp77501-78000/sp77760.cva

The laptop processors in this range are built on to the motherboard; however there is a good chance you can upgrade the RAM and SSD.

[Chaskone]

thank you very much for the information what I would like to know is if I can add a ddr4 ram memory and how many mhz because now I have a 4gb 800mhz ddr3 that information I cannot find it

[mike_coreit]

Hi Chaskone,

As Erico mentioned we would need more information (product number or product name) in order to give a more accurate answer. This should be written on the underneath of the laptop.

[Chaskone]

ok I already put it above, I suppose it is this: LAPTOP-7R8R21UI. is that what you mean? because I put it earlier.
what i saw under the laptop is:
Product: X7T78UA # ABA
Model: 15-ba009dx

[mike_coreit]

I have found the servicing guide for this model: http://h10032.www1.hp.com/ctg/Manual/c05227786

[Chaskone]

My processor is amd a6-7310 apu, can I only have 8gb ram? 

[mike_coreit]

I believe the section we should be looking at is HP Notebook PC models with AMD A12, A10, A8, A6, E2 processors

According to HP Part Surfer the motherboard is a UMA version.

In the column for UMA, A6 there is a tick for these details:

Two non-customer-accessible/upgradable memory module slots

DDR3L-1600 single channel support

DDR3L-1333 single channel support

Supports up to 16 GB of system RAM

Also for the hard drive: Supports 6.35-cm (2.5-in) SATA hard drives in 9.5-mm (.37-in) and 7.0-mm (.28-in) thicknesses.

You could fit a 2.5" SATA SSD in the laptop.