-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- driver for universal serial bus controller

Create an account on the HP Community to personalize your profile and ask a question
02-08-2018 12:09 PM
Product Name: HP Notebook G250 intel celeron N3350
Operating System: Microsoft Windows 7 (64-bit)
I am looking for a Win 7 x64 compatible driver for my USB controller
for my hp notebook and unable to install Intel USB 3.0 Host Controller Driver.
Says " this computer does not meet the minumum requirements for installing the software"
Please suggest me
Solved! Go to Solution.
Accepted Solutions
02-08-2018 03:26 PM
Hi:
Please post the hardware ID for the USB controller.
Use this guide for how to find the hardware ID...
https://www.howtogeek.com/193798/how-to-find-drivers-for-unknown-devices-in-the-device-manager/
As you may be aware, HP only supports that platform for W10 and there may not be a W7 driver even from Intel.
See if these drivers get the other devices to install.
Chipset: 2nd driver down on the left side of the page is the auto install file.
PCI Simple Comms controller:
02-08-2018 12:46 PM
Hi:
Use the one directly from Intel...
Download, unzip and run the setup application...
02-08-2018 03:26 PM
Hi:
Please post the hardware ID for the USB controller.
Use this guide for how to find the hardware ID...
https://www.howtogeek.com/193798/how-to-find-drivers-for-unknown-devices-in-the-device-manager/
As you may be aware, HP only supports that platform for W10 and there may not be a W7 driver even from Intel.
See if these drivers get the other devices to install.
Chipset: 2nd driver down on the left side of the page is the auto install file.
PCI Simple Comms controller: