cancel
geremia85 Student
Student
1 0 0 0
Message 1 of 2
58
Flag Post
HP Recommended

error kernel power 41-63

hp pavilion notebook X7H35EA#ABZ
Microsoft Windows 10 (64-bit)

hello,

 

i'm looking for some tips, my notebook, randomly turn (without any related reason or warning sign) off and i have the error kernel power 41 63.

some times ago it happened more often and i decided to format the pc and reinstall the sistem and everything was fine for a while. but the problem come back.

 

the hp diagnosis tool provided with hp assistant doesn't give any error information.

 

searching on internet i've seen that is a common issue but i can't find anything usefull.

 

 

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
21,163 20,784 1,357 2,143
Message 2 of 2
28
Flag Post
HP Recommended

error kernel power 41-63

@geremia85,

 

Thank you for posting your query on HP Community,

 

Let's try these steps here: 

 

Disable the automatic restart option to view error messages

Errors might occur but not display with Automatic restart enabled. Disable this option to allow the computer to display error messages instead of restarting.

  1. In Windows, search for and open View advanced system settings.

  2. Click Settings in the Startup and Recovery section.

  3. Remove the check mark next to Automatically restart, and then click OK.

    Location of the Automatically restart check box

  4. Restart the computer.

The computer no longer restarts automatically when a problem occurs. Instead, a blue screen displays with useful information. You can search for a resolution using the information in the error.

 

If the issue persists, I would suggest here is to run an extensive system test from F2 and check if the hardware components on your PC are functioning correctly.

 

1. Hold the power button for at least five seconds to turn off the computer.

2. Turn on the computer and immediately press Esc repeatedly, about once every second.

When the menu appears, press the F2 key.

3. On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.

4. Click Extensive Test.

5. Click Run once, or Loop until error.

While the test is running, the time remaining and test result for each component are

shown on the screen.

6. If a component fails a test, write down the failure ID (24-digit code) so you have it

available when you contact HP Customer Support. The information is also available in

Test Logs on the main menu.

 

Refer this article to know more information about running system diagnostics on your PC. Click Here

 

You may refer to this support document for further assistance - HP PCs - The Computer Restarts Unexpectedly (Windows 10, 😎

 

Let me know how it goes for further assistance!

 

That said, If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Jeet_Singh
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation