image colors with my webcam are incorrect

[madronoman]

I use my webcam primarily with Zoom.   The colors on the built-in web cam are way off....blues are bright purple for example.

The webcam driver appears to be up to date.  Any ideas on how to fix the colors?

[praveenbv]

@madronoman, Welcome to the HP Support Community!

Thanks for engaging in HP support Forums! This is a wonderful location to converse with the community, get assistance, and find tips! I understand you are having issues with the Webcam not working properly on your HP notebook. Don't worry as I have a few suggestions which should help you resolve this issue.

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any software or hardware changes on the PC before the issue started?

Have you tried to uninstall and reinstall the drivers?

Have you tried to update the Bios?

In the meantime, let's try these steps here: 

Let's start off by updating the Bios,Chipset and Webcam drivers for your PC from our HP support website, using this link.

Once done, restart the computer and then check if it works.

Also, download and install HP support assistant on your PC. It should automatically download and install the latest updates and drivers for your PC.

Refer this link to know how to use HP support assistant.

1. Shut down your computer, and disconnect the power cord.

2. Remove the battery from the battery compartment. If your computer has a sealed battery that cannot be removed, then perform a reset as shown in the HP support document: Performing a Hard Reset or Forced Reset.

3. Press and hold the power button for 10 seconds, and then reinsert the battery and reconnect the power cord.

4. Turn on the computer and wait for Windows to open.

5. Click Start, type Device Manager in the search field, and select Device Manager from the list provided.

6. If there is no Imaging devices category listed, select Action, then Scan for hardware changes.

   Figure : Scan for hardware changes

   

7. If Device Manager does not recognize the webcam after the scan, Use Microsoft System Restore to go back to a time when the Webcam was working properly. If problems persist, the webcam may have become unplugged internally and requires service.

For further assistance, please HP PCs - Webcam Troubleshooting (Windows 10, 

If the issue persists, please follow these steps here:

Option 1: Check Device Manager to make sure it is working properly.

1. Click your Start button, type “Device Manager,” and press Enter.
2. Once Device Manager loads click “View” and then “Show Hidden Devices.”
3. Locate the “Imaging Devices” section.
4. Note whether you see the webcam here.
5. If the webcam is listed, right-click it and verify that it is not “Disabled.”
6. If the webcam is listed and not disabled, move onto Option 2.  If the webcam is not listed you will move onto Option 4. 

Option 2:   Allow Windows to Re-install the device.

1. While still in Device Manager right click on your webcam and select “Uninstall”
2. If prompted select “remove driver and driver package.”
3. Reboot your notebook and allow Windows to attempt to reinstall the webcam.
4. If Windows detects the webcam verify the functionality of the webcam.
5. If Windows does not detect the webcam and install it move onto Option 3.

Option 3:  Manually install the drivers for your webcam. 

1. Use this website to determine your product/model number. 
2. Visit the HP Support Page and use this product number to visit your product’s specific page.
3. Go to “Drivers and Software” and locate the driver for your webcam.  NOTE: the drivers for the webcam are sometimes bundled with the YouCam software.
4. Download and install this driver.
5. Reboot the PC.
6. Verify functionality. 

Option 4:  Manually re-detecting the hardware.

1. Disconnect all external devices.
2. Shut down the notebook.
3. Remove the battery and AC power.
4. Press and hold the power button for 10-15 seconds.
5. Reinstall the battery and AC power.  Then turn the notebook on.
6. Once Windows is loaded go back to Device Manager.
7. Selection “Action” and then “Scan for hardware changes.”
8. If Device Manager detects the hardware allow it to install.
9. If Device Manager does not detect the hardware see Option 5.

Option 5: System Restore and System Recovery. 

Link: Perform System Restore & Performing System Recovery. Note that any data that is not backed up prior to recovery will be lost.

Options 6: Repair

If nothing works, I would suggest this could be a hardware failure. I would suggest you contact our HP phone support for further assistance. Please fill in the product details to get the tech support number.

For more details, please follow the steps suggested in the support document for - HP PCs - Webcam Troubleshooting (Windows 10, 

Please use the following link to create yourself a case number, then call and it may help speed up the call process:

Step 1. Open link: www.hp.com/contacthp/

Step 2. Enter a Product number or select to auto-detect

Step 3. Scroll down to "Still need help? Complete the form to select your contact options"

Step 4. Scroll down and click: HP contact options - click on Get phone number case number and phone number appear.

They will be happy to assist you immediately.

Keep me posted for any other assistance,

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

[madronoman]

Thank you...I have followed all of your instructions and have determined I have a hardware failure with my webcam.  I will use an external webcam if I need proper color resolution.

Thanks

[praveenbv]

Hi @madronoman,

Welcome to the HP Support Community.  

As this is a hardware issue, I'd suggest you Contact HP in your region regarding the service options for your computer. 

If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile Name, you should see a little blue envelope, please click on it.   

Have a great day!  

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!