• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP ZBook Fury 15 G7 Mobile Workstation (9VS26AV)

I recently updated the BIOS to S92 Ver. 01.18.01 (from 01.16.00).

Ever since, when I plug in a DisplayPort monitor to either USB-C port, I get a warning from Windows: "PC isn't charging".

This didn't happen before the BIOS update.  No other updates were applied (e.g. no change to Windows).  It's the same monitor as before (Iiyama PL2792UH).

The monitor is actually configured to NOT put power out through the USB-C (USB BC is OFF).

I have the laptop's power supply plugged in (150W, barrel connector) and Windows shows that it's connected (lightning flash on the battery icon in the system tray).

Given that the power supply is connected AND that the monitor isn't pushing power I wouldn't expect there to be an attempt at charging via USB-C.

 

Anybody else experience anything like this?

Thanks

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.