• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended

 

I need replacement rubber feet for my HP Envy x360 15-ey0023dx, specifically this model. The other rubber feet i found are not of the same shape as the ones for my model. I could not find anything that is even close to similar to design. Thanks in advance.

 

For clarification, they are similar to the ones you'll see online, but instead of a rectangular flat strip, they are more rounded on the ends of the strip, with an edge in the middle along the strip. This video shows the design my model has:

https://www.youtube.com/watch?v=Tajo7EFh8WM&t=146s&ab_channel=HPSupport

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

The ones I linked are 31.5 cm. Its possible to trim them with an Xacto knife for good fit. 

View solution in original post

5 REPLIES 5
HP Recommended

Rubber Kit:
For use only on computer models with WLAN capability N05695-001

 

I found that in the Service Manual. I cannot find a picture of what the rubber kit includes, however. Are your feet round?

 

Service Manual 

 

The picture on p. 11 shows round feet but the picture on p. 32 shows long strips. 

 

I assume this is the kind of thing you found that is not the right size:

 

https://www.ebay.com/itm/335757834367?_skw=HP+x360+15-ey+rubber+feet&itmmeta=01JH38QBD06X05KAT346B7J...

 

 

HP Recommended

The feet on my model is round on the ends, and are of a long strip. They are also tapered into somewhat of a point along the line for raising the laptop. I pretty much cannot find any other type than the ones you linked on ebay.

 

this HP support video has the exact same design as my laptop model, and at the 0:27 mark, you'll see the design I need.

https://www.youtube.com/watch?v=Tajo7EFh8WM&t=146s&ab_channel=HPSupport

 

HP Recommended

Yeah it does not appear HP has a replacement part for those other than the whole bottom cover which would include the rubber strips. Can you measure how long yours are? BTW, I do not work for HP so don't shoot the messenger. Did you stretch the original ones out too much to reuse?

HP Recommended

Yeah they are not intact anymore. One strip is about less than 12 inches, the other is more than 12 inches, or 30.5 and over 31 cm.

 

HP Recommended

The ones I linked are 31.5 cm. Its possible to trim them with an Xacto knife for good fit. 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.