-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- set ssd to master and hdd to slave

Create an account on the HP Community to personalize your profile and ask a question
10-22-2017 03:31 PM
Hi
I recently installed a ssd instead of my hdd drive and installed a caddy instead of my dvd-drive and put my hdd inside there.the problem is my ssd is not recognized as master and instead my hdd inside the caddy has been master.
how can I set my ssd as first/master drive and hdd as slave/second ?
thanks
10-22-2017 03:37 PM
Lets take a step back...master/slave does not apply any more. The drives are SATA and SATA does not have master/slave concepts.
You should leave the hard drive with the caddy out of the equation until you get an OS installed on the SSD. If you remove the DVD caddy and turn power on with the SSD in the 2.5 inch SATA bay, what happens?
10-23-2017 12:46 AM
when I pull out the caddy drive the os installed on the ssd will run and it's okay but as I have installed another os on the hdd , the problem is the os installed on the hdd in recognized as the main which is on the caddy and I need the os on the ssd be the main .
- Tags:
- but at restart i have same problem. Work Only manual select from bios at every start. I made switch HDD with ssd and works fine
- but i think ssd în optical îs not so fast.
- but when i hit start The laptop boot from HDD Who îs in optical. Only if i enter în bios an put manual to boot from hard drive
- Hi. Same problem i have on cq61. I have win10 on ssd and win 7 on HDD. The same configuration. În bios order is harddrive then optical
- then îs booting from ssd
12-05-2019 03:53 PM
Hello,
Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire:
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!
Thank you
I work on behalf of HP