-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
15
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
Yes this (or equivalent) is the part you need:
FHD, for use in models with a non-touch screen (anti glare)798933-007
The cable is the same whether you have HD or FHD so an FHD screen would be a dropin replacement:
Its and LED 30 pin lower right connector. These really inexpensive panels tend to be OK but not super bright or crisp. You can use an IPS higher end FHD screen panel as long as it is the 15.6 inch LED and has the same cable connection on the back. You will pay a bit more for a true enthusiast laptop screen but in my opinion worth every penny.
Post back with any more questions and please accept as solution if this is the info you needed
HP Recommended
You have an AMD A12 processor so max memory is 8 gigs per slot, 2 slots so 16 gigs total. Manuals says this:
DDR4-1866 dual channel support (DDR4-2400 bridge to DDR4-2133, and DDR4-2133 downgrade to DDR4-1866)
But the specs say your laptop came with a 4 gig and a 2 gig so 6 gigs total running in DDR4-2133 speed. The memory to be installed is DDR4-2400 SO-DIMM. So I am reading that to say if you put in 2 x 8 gig DDR4-2400 you will be running dual channel at 2133 speed. If you put in a single 8 gig module you will be running at the same speed, but single channel. I would not be shocked to hear it runs at 1866 speed in dual channel mode as I know that to be true on A10 and lower models.
Post back with any more questions.
15
0
0
HP Recommended
HP Recommended
Yes this (or equivalent) is the part you need:
FHD, for use in models with a non-touch screen (anti glare)798933-007
The cable is the same whether you have HD or FHD so an FHD screen would be a dropin replacement:
Its and LED 30 pin lower right connector. These really inexpensive panels tend to be OK but not super bright or crisp. You can use an IPS higher end FHD screen panel as long as it is the 15.6 inch LED and has the same cable connection on the back. You will pay a bit more for a true enthusiast laptop screen but in my opinion worth every penny.
Post back with any more questions and please accept as solution if this is the info you needed
15
0
0
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community