-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- while im updating my bios it it shows error again and again ...
![Sign in](/html/assets/sign-in-banner.png)
Create an account on the HP Community to personalize your profile and ask a question
02-16-2020 12:21 AM
Solved! Go to Solution.
Accepted Solutions
02-16-2020 03:05 AM
Thanks for your return,
Please update the HP PC Hardware Diagnostics UEFI interface from the HP link below.
http://ftp.hp.com/pub/softpaq/sp101501-102000/sp101502.exe
Then, please follow the steps proposed in my previous message. Please update the BIOS to version F.65 since the HP link below.
https://ftp.hp.com/pub/softpaq/sp100501-101000/sp100871.exe
I remain at your disposal in case of need.
Best regards,
02-16-2020 12:51 AM
Hello,
What is the BIOS version you are trying to install?
What version of BIOS is currently installed on your computer?
- Using the notebook keyboard, press the fn and esc keys to open the HP System Information utility.
In order to help you, please follow the instructions in the "Update the BIOS manually from a USB Flash drive (outside of Windows)" section of the following HP link: Updating the BIOS (Basic Input Output System).
The BIOS update is available below.
Do not hesitate to contact us in case of need.
Best regards,🤠
02-16-2020 03:05 AM
Thanks for your return,
Please update the HP PC Hardware Diagnostics UEFI interface from the HP link below.
http://ftp.hp.com/pub/softpaq/sp101501-102000/sp101502.exe
Then, please follow the steps proposed in my previous message. Please update the BIOS to version F.65 since the HP link below.
https://ftp.hp.com/pub/softpaq/sp100501-101000/sp100871.exe
I remain at your disposal in case of need.
Best regards,
02-16-2020 04:07 AM
Thanks for your return,
The drive controller in your notebook is already set to AHCI at the factory, and cannot be changed in the BIOS.
This is managed by Intel Rapid Storage Technology Driver, so please download and install the driver below.
https://downloadmirror.intel.com/29339/eng/SetupRST.exe
If my previous answer was favorable to you, thank you to close the subject by clicking on 'Accept as solution' at the bottom of the previous message.
I welcome you to the English HP community support.
Do not hesitate to contact us if needed
Best regards,