cancel
Provost Provost
Provost
8595 8450 689 3086
Message 11 of 16
288
Flag Post
HP Recommended

Solved!

After i make a reset to my HP stream 7 its unresolved and i can't make anything


@Bati23Osmwrote:

Error 

INACCESSIBLE_BOOT_DEVICE


Hi @Bati23Osm

 

Shut down the tablet (press and hold the power on button for 5 seconds until it powers off).


First, press the Volume Down button and then press and hold the Power button for about 4 seconds. Release both buttons until the Startup Menu displays.


HP Startup menu should appear.


From the Startup menu, tap F2 to select System Diagnostics.

 

 

 

 

Can you perform the hardware test to ensure all is fine (fast or quick test)  ?

 

 

Do you get the TPM message now or is just this for inaccessible boot device ?

 

90219364-05f6-451b-aff5-7213fb8a23fc.jpeg

****  Please, click on the button below to mark this post as an ACCEPTED SOLUTION if it helped you
****  Don't hesitate to hit the THUMB-UP+ button below to say THANKS or give LIKE
I am not employed by HP Inc. **** I express personal opinion only. **** HP Expert **** I work in IT and cyber security

Reply
0 Kudos
Bati23Osm Tutor
Tutor
17 13 0 1
Message 12 of 16
273
Flag Post
HP Recommended

Solved!

After i make a reset to my HP stream 7 its unresolved and i can't make anything

I get 0xc000021a and then i searched youtube and the solution i did dism
Then i get inaccessible boot device now i make quick test and fast one?
Reply
0 Kudos
Highlighted
Bati23Osm Tutor
Tutor
17 13 0 1
Message 13 of 16
272
Flag Post
HP Recommended

Solved!

After i make a reset to my HP stream 7 its unresolved and i can't make anything

@It_winsec
Reply
0 Kudos
Bati23Osm Tutor
Tutor
17 13 0 1
Message 14 of 16
264
Flag Post
HP Recommended

Solved!

After i make a reset to my HP stream 7 its unresolved and i can't make anything

Hi @It_winsec, i did what you said quick test and all is fine now what?
Thanks alot
Much love
Reply
0 Kudos
Bati23Osm Tutor
Tutor
17 13 0 1
Message 15 of 16
258
Flag Post
HP Recommended

Solved!

After i make a reset to my HP stream 7 its unresolved and i can't make anything

I got inaccessible boot device again 😢😢😢
Reply
0 Kudos
Provost Provost
Provost
8595 8450 689 3086
Message 16 of 16
230
Flag Post
HP Recommended

Solved!

After i make a reset to my HP stream 7 its unresolved and i can't make anything

Hello @Bati23Osm

 

Thank you for your update.

 

It's good the hardware diagnostics completed and it's without issues - this confirms it's a software problem.

The issue may be caused because Windows can't detect the boot device during startup.

 

There are a few things which you may try to fix the issue without reinstalling Windows but changes for success are low. In addition to that, you don't have a keyboard and trying them from a touch screen is a tough task.

Because of this, I recommend you follow the steps in this HP official article >> https://support.hp.com/id-en/document/c04576841#AbT3

 

Reset your PC to factory default condition. This will reinstall Windows, drivers and some apps and should turn the device 'like new'. Hopefully, this should resolve the issue.

****  Please, click on the button below to mark this post as an ACCEPTED SOLUTION if it helped you
****  Don't hesitate to hit the THUMB-UP+ button below to say THANKS or give LIKE
I am not employed by HP Inc. **** I express personal opinion only. **** HP Expert **** I work in IT and cyber security

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation