Having trouble signing in? Try this!
Post new question
Question
After i make a reset to my HP stream 7 its unresolved and i can't make anything
Replies (15)
Reply
 
Dean
Posts: 7,141
Member Since: ‎05-06-2013
Message 11 of 16 (144 Views)

Re: My hp stream 7 tab unresolved after i reset that tab, what to do please

[ Edited ]

@Bati23Osmwrote:

Error 

INACCESSIBLE_BOOT_DEVICE


Hi @Bati23Osm

 

Shut down the tablet (press and hold the power on button for 5 seconds until it powers off).


First, press the Volume Down button and then press and hold the Power button for about 4 seconds. Release both buttons until the Startup Menu displays.


HP Startup menu should appear.


From the Startup menu, tap F2 to select System Diagnostics.

 

 

 

 

Can you perform the hardware test to ensure all is fine (fast or quick test)  ?

 

 

Do you get the TPM message now or is just this for inaccessible boot device ?

 

90219364-05f6-451b-aff5-7213fb8a23fc.jpeg

* You can say Thanks or give me LIKE with the Thumb Up+ button (+1)
* Please, use the button to accept this post as a solution if my comment helped

IT_WinSec : I am not employed by HP Inc. I am a volunteer and I express personal opinion only. I work in IT and cyber security
Tutor
Posts: 17
Member Since: ‎02-28-2018
Message 12 of 16 (129 Views)

Re: After i make a reset to my HP stream 7 its unresolved and i can't make anything

I get 0xc000021a and then i searched youtube and the solution i did dism
Then i get inaccessible boot device now i make quick test and fast one?
Tutor
Posts: 17
Member Since: ‎02-28-2018
Message 13 of 16 (128 Views)

Re: After i make a reset to my HP stream 7 its unresolved and i can't make anything

@It_winsec
Tutor
Posts: 17
Member Since: ‎02-28-2018
Message 14 of 16 (120 Views)

Re: After i make a reset to my HP stream 7 its unresolved and i can't make anything

Hi @It_winsec, i did what you said quick test and all is fine now what?
Thanks alot
Much love
Tutor
Posts: 17
Member Since: ‎02-28-2018
Message 15 of 16 (114 Views)

Re: After i make a reset to my HP stream 7 its unresolved and i can't make anything

I got inaccessible boot device again 😢😢😢
Highlighted
Dean
Posts: 7,141
Member Since: ‎05-06-2013
Message 16 of 16 (86 Views)

Re: After i make a reset to my HP stream 7 its unresolved and i can't make anything

Hello @Bati23Osm

 

Thank you for your update.

 

It's good the hardware diagnostics completed and it's without issues - this confirms it's a software problem.

The issue may be caused because Windows can't detect the boot device during startup.

 

There are a few things which you may try to fix the issue without reinstalling Windows but changes for success are low. In addition to that, you don't have a keyboard and trying them from a touch screen is a tough task.

Because of this, I recommend you follow the steps in this HP official article >> https://support.hp.com/id-en/document/c04576841#AbT3

 

Reset your PC to factory default condition. This will reinstall Windows, drivers and some apps and should turn the device 'like new'. Hopefully, this should resolve the issue.

* You can say Thanks or give me LIKE with the Thumb Up+ button (+1)
* Please, use the button to accept this post as a solution if my comment helped

IT_WinSec : I am not employed by HP Inc. I am a volunteer and I express personal opinion only. I work in IT and cyber security
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation