Blue screen loop / Automatic repair loop

[natutupi]

Hello, Nat here

TO PUT CONTEXT TO THINGS:

i was playing music with my laptop while i was dping laundry in the other room. I can hear the music until it became static and crashed my laptop.

Now everytime i boot it up, it goes directly to BSOD with different stop codes.

Here are the following codes:

IRQL_NOT_LESS_OR_EQUAL (everytime i boot my laptop, this code pops up)

KMODE EXCEPTION NOT HANDLED

APC INDEX MISMATCH

PFN_LIST_CORRUPT

KERNEL SECURITY CHECK FAILURE

WHEA UNCORRECTABLE ERROR

Wdf01000.sys

MEMORY MANAGEMENT

PAGE FAULT IN NONPAGED AREA

DRIVER OVERRAN STACK BUFFER

These codes prevents me from running my Laptop.

Everytime the First code shows up, the next thing is that it will do an automatic repair, but the repair wont start and instead its gonna be anpther BSOD ( With one of the codes mentioned above). And some time later, it will crash and wont load anymore.

What should i do? Is there anyway i can repair this on my own

And if youre wondering: i accessed once my laptop for a minute once before the BSOD loop happened. I checked everything and tried to fix it with the solutions available online but it didnt happened. The files are still there, its working properly before it crashed, 

I did an extensive diagnostic test but everything passed. I want to open safe mode but i cant access the safe mode

What should i do?

Thanks 

[CF4]

Hi

Please 1st try a Hard Reset

Press and Hold the PWR off button for 4 seconds to force a PWR off.

Unplug from the wall.

If you see a battery compartment door, your computer has a removable battery.

Remove any removable battery.

This is valid for most notebooks;

Press and hold the power button for 15 seconds to complete the reset.

Re-insert any battery you removed.

This may be relevant...

This First part only works when a valid Recovery Partition is enabled.
If it displays an error message then move onto the Second Part:-
OR if you have data you wish to try and save using the XCOPY command.
Then create your own Repair/Recovery/Rebuild/Re-install media or buy a set from HP.

Turn off the computer.
Disconnect all connected devices and cables, Media Drives, USB drives, printers, & faxes.
Remove media from internal drives, and remove any recently added internal hardware.
Do not disconnect the monitor, keyboard, mouse, or power cord.

Turn on the computer and repeatedly press the F11 key, about once every second,
until the Choose an option screen is displayed, and then continue.

On the Choose an Option screen, click Troubleshoot, and work your way through the screens.

Second Part:-
This may require another PC. Find and Download your .iso from…
(You will need a NON_OEM key for W7);
W8.x and W10 should activate automagically from their embedded licence key.
https://www.microsoft.com/en-us/software-download/windows7
https://www.microsoft.com/en-us/software-download/windows8
https://www.microsoft.com/en-us/software-download/windows10

For when it’s a NON MS OS ( iOS / Linux ) creating the install media.
www.microsoft.com/en-us/software-download/windows10ISO

A 3rd party site is (Please be careful)...
https://mirror.corenoc.de/digitalrivercontent.net/

Expand/Extract/Burn the iso Image onto a DVD/USB as needed.
Microsoft’s Creator Tool will make the required DVD or USB.

Even though it has NO actual HP software/drivers included, you may be able to
XCOPY the C:\Users\* area onto a ‘large’ USB stick, via the Command Prompt.

You’ll need to try various drive letters; D:..-..Z: until it’s matched - could be G; mine’s S:

C:\>XCOPY C:\Users\* S:\ /e /i /h (then files like those 3 listed below get copied over)

C:\Users\desktop.ini
C:\Users\All Users\agent.1509128044.bdinstall.bin
C:\Users\All Users\HP Deskjet 2540 series\Help\flash\zoom.swf

Then you can try System Recovery Options / Advanced Options shown in the screenshots.

NB:- W7 Try running a Startup Repair more than once for a full fix.
NB: - W10 Begin with the Automatic Repair, then Startup Settings etc.

From either the C:\ or the X:\ prompt try the following

cd boot
bootrec /FixMBR
bootrec /FixBoot
bootrec /RebuildBCD

If the above FAILS then please try:-
http://www.thewindowsclub.com/repair-master-boot-record-mbr-windows
http://www.thewindowsclub.com/install-windows-7-from-usb
http://www.thewindowsclub.com/install-windows-10-from-usb

[natutupi]

Hp omen doesnt have a removable battery, i tried the first step, but it goes straight to Automatic repairs AND BDOS looped again

[CF4]

Hi

My Bad

IF you see a battery compartment door, your computer has a removable battery.

So a hard reset failed.