cancel
Showing results for 
Search instead for 
Did you mean: 
Provost Provost
Provost
9,664 9,445 1,848 3,481
Message 11 of 12
144
Flag Post
HP Recommended

Solved!

Boot device not found / no os installed

You are going to have to replace the drive. You can choose either a 2.5" mechanical HDD or much faster 2.5" SATA3 SSD. Here is a small guide on what you need to do.

So what you need is a 2.5" SATA3 hard drive (max 2TB because of the thickness of drive). You can get from your preferred brand such as Seagate, WD...

Example:

https://www.amazon.com/Seagate-Barracuda-2-5-Inch-Internal-ST2000LM015/dp/B01LYNQXCP/ref=sr_1_4?ie=U...

 

or you could opt for a 2.5" SATA3 SSD which would improve the everyday performance of the PC

Example:

https://www.amazon.com/Samsung-Inch-Internal-MZ-76E1T0B-AM/dp/B0781Z7Y3S/ref=sr_1_1?s=electronics&ie...

 

On page 53 of the service manual you can see the steps to replace drive:

http://h10032.www1.hp.com/ctg/Manual/c05493257

 

You will need to reinstall the OS on the drive, either by using recovery disks, migrating a backup image or by downloading media creation tool from Microsoft on different PC running and creating a bootable pendrive with the OS on it on a different computer. (there is an explanation on the Microsoft web page on how to create the pendrive) Windows will automatically activate once installed and connected to the Internet.

https://www.microsoft.com/en-us/software-download/windows10

 

If you choose this option you will need to use the pendrive to perform a clean install of Windows 10. You might need to disable fastboot and secure boot in BIOS (probably not). So, insert the pendrive in the PC and it should boot directly from the drive. If not, turn off the PC by holding the power button. Press the power button and immediately keep pressing ESC  until the startup menu appears and then press F9 and choose the pendrive in the boot menu. Once it boots from pendrive follow the procedure to install Windows.

 

When finished installing allow Windows to completely update and find all or most drivers. You can follow this process by going into settings > Security and update > click on Verify for updates. You might need to reboot a couple of times. Once completely updated you can go into device manager and see if there are any missing drivers (there will be yellow exclamation mark next to the device). You can find these drivers and software on HP support page for your product.

https://support.hp.com/us-en/product/hp-15-bs000-laptop-pc/15551412

 I recommend installing HP support assistant which will help to keep drivers up to date and much more. Here you can download latest version

https://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html

 

Hope it helps,

David

Reply
0 Kudos
Highlighted
bubblytea Top Student
Top Student
9 7 0 0
Message 12 of 12
140
Flag Post
HP Recommended

Solved!

Boot device not found / no os installed

Thank you for the help.

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation