-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Re: Got My Laptop Back From Warranty Repair, Still Not Worki...

Create an account on the HP Community to personalize your profile and ask a question
08-23-2018 03:10 AM - edited 08-23-2018 03:13 AM
Hello. About a month ago my laptop completely stopped working. Considering that I still had 2 months of Door to Door warranty left, I called the local HP Support. After around 20 minutes I had already talked it out and had a courier to pick my laptop up in few days.
Things went pretty smoothly after that and long story short, the pc came back today.
Sadly, I still can't use it. I get to the first time configuration screen, select language etc. and once I get back to the black HP loading screen which should trigger the "Welcome" blue screens it suddenly resets and creates this loop. I would rather want to avoid having to send it to repair AGAIN. Anyway I can fix this myself?
Solved! Go to Solution.
Accepted Solutions
08-25-2018 05:32 AM
Update. A Factory Reset did it just fine ( I couldn't do a normal reset for some reason ). The laptop is fully operational, though I did get a BSOD once ( CRITICAL PROCESS DIED ) but it didn't happen again. Thanks for the help though.
08-23-2018 04:49 AM
Hi
maybe...
1st Please try a Hard Reset
This is valid for most notebooks, and some desktops.
Press and Hold the PWR off button for 4 seconds to force a PWR off.
Unplug from the wall.
IF you see a battery compartment door, then your computer has a removable battery.
IF NOT then you do not have a removable battery.
Remove any removable battery.
Press and hold the power button for 15 seconds to complete the reset.
(Re-insert any battery you removed).
This First part only works when a valid Recovery Partition is enabled.
If it displays an error message then move onto the Second Part:-
OR if you have data you wish to try and save using the XCOPY command.
Then create your own Repair/Recovery/Rebuild/Re-install media or buy a set from HP.
Turn off the computer.
Disconnect all connected devices and cables, Media Drives, USB drives, printers, & faxes.
Remove media from internal drives, and remove any recently added internal hardware.
Do not disconnect the monitor, keyboard, mouse, or power cord.
Turn on the computer and repeatedly press the F11 key, about once every second,
until the Choose an option screen is displayed, and then continue.
On the Choose an Option screen, click Troubleshoot, and work your way through the screens.
Second Part:-
This may require another PC. Find and Download your .iso from…
(You will need a NON_OEM key for W7);
W8.x and W10 should activate automagically from their embedded licence key.
https://www.microsoft.com/en-us/software-download/windows7
https://www.microsoft.com/en-us/software-download/windows8
https://www.microsoft.com/en-us/software-download/windows10
For when it’s a NON MS OS ( iOS / Linux ) creating the install media.
www.microsoft.com/en-us/software-download/windows10ISO
A 3rd party site is (Courtesy of @CherylG)...
http://getintopc.com/softwares/operating-systems/windows-7-home-premium-free-download-iso-32-bit-64-...
Expand/Extract/Burn the iso Image onto a DVD/USB as needed.
Microsoft’s Creator Tool will make the required DVD or USB.
Even though it has NO actual HP software/drivers included, you may be able to
XCOPY the C:\Users\* area onto a ‘large’ USB stick, via the Command Prompt.
You’ll need to try various drive letters; D:..-..Z: until it’s matched - could be G; mine’s S:
C:\>XCOPY C:\Users\* S:\ /e /i /h (then files like those 3 listed below get copied over)
C:\Users\desktop.ini
C:\Users\All Users\agent.1509128044.bdinstall.bin
C:\Users\All Users\HP Deskjet 2540 series\Help\flash\zoom.swf
Then you can try System Recovery Options / Advanced Options shown in the screenshots.
NB:- W7 Try running a Startup Repair more than once for a full fix.
NB: - W10 Begin with the Automatic Repair, then Startup Settings etc.
From either the C:\ or the X:\ prompt try the following
cd boot
bootrec /FixMBR
bootrec /FixBoot
bootrec /RebuildBCD
If the above FAILS then please try:-
http://www.thewindowsclub.com/repair-master-boot-record-mbr-windows
http://www.thewindowsclub.com/install-windows-7-from-usb
http://www.thewindowsclub.com/install-windows-10-from-usb

08-25-2018 05:32 AM
Update. A Factory Reset did it just fine ( I couldn't do a normal reset for some reason ). The laptop is fully operational, though I did get a BSOD once ( CRITICAL PROCESS DIED ) but it didn't happen again. Thanks for the help though.