-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Re: HP Firmware Pack (Q85) 01.23.00 Rev.A
Create an account on the HP Community to personalize your profile and ask a question
03-01-2023 09:08 AM
After windows 11 force BIOS update my HP probook 450 G5 not post .
caps lock blink 3 times long and 2 times sort .
Any help please ?
03-01-2023 09:39 AM
There are a few different means to attempt recovery of the BIOS
Try recovering the BIOS first.
Create an HP Recovery flash drive.
Get your previous version BIOS file from software and drivers portal at the hyper link below
https://support.hp.com/us-en/drivers/selfservice/hp-probook-450-g5-notebook-pc/17047142
After you recover the BIOS I do recommend that you change your update settings in Windows to notify me instead of keep me up to date.
If you are a Windows Insider, those options will not be available and you best option is to turn off Windows update for a while.
I am a volunteer forum member. If my suggestion solved your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
03-01-2023 11:42 AM
Thank you for the fast reply and the try to help .
I have try all this but nothing works .
i believe is very big fault from HP to force laptop bios update .
i have a very good working laptop with windows 11 before yesterday and now i have nothing .
im not computer expert but i see many people have problems after bios updates.
I have many HP products but after that i will think very much to buy again .
Cost me to much to buy this laptop .
thank you again.
03-02-2023 09:20 AM
I suggest taking it to a PC shop.
It should help to have a PC technician to recover the BIOS. Take your BIOS recovery USB flash drive with you.
Recovering a BIOS is not a simple task for many people.
I would not give up just yet.
I am a volunteer forum member. If my suggestion solved your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
03-02-2023 10:23 AM
Thank you so much for the try to help me,
in the end i think i will must pay more money for an HP problem that they create.
People buy from big brands like HP beacause we believe we secure our money and personal data .
i hope i will make it work again soon .
03-09-2023 09:51 AM
My laptop have :
RAM KINGSTON KF426S15IB1/16 FURY IMPACT 16GB SO-DIMM DDR4 2666MHZ
with kingston ram i make clean install with win 10 Pro ,
Microsoft check with pc health that my system can upgrade to windows 11 Pro . Update my windows to 11 and after almost a month and this firmware update i must change memmory to old 8 sodimm .
I hope that solve the problem for good .
I write this to help others .
03-09-2023 10:03 AM
So removing the memory solved the issue and it was not related to the BIOS update?
You hadn't mentioned that you had replaced the memory before the no-post happened.
That would have definitely been helpful to have known for troubleshooting.
I am a volunteer forum member. If my suggestion solved your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
03-09-2023 10:30 AM
I have change memory before start clean format .
my system work 1 month without problem with kingston memory .
No post happen after bios update .
Problem solved now but when i install kingston back laptop no post ..
03-09-2023 10:35 AM - edited 03-12-2023 12:23 PM
OK.
So now we are on the same page. 😉
It was not a BIOS update issue at all.
When you update memory it is usually best to install memory that is guaranteed to be compatible and to install memory in pairs of identical DIMM modules.
Adding a single module of a different brand and/or different configuration to make an upgrade may cause a no-post.
I am a volunteer forum member. If my suggestion solved your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"