-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- HP RST linux

Create an account on the HP Community to personalize your profile and ask a question
05-18-2025 02:10 AM
How to install Linux distros on HP Laptops
Had a heck of a time trying to get Linux installed on an old laptop of mine for a family member that I didn't use anymore and was barely usable for even web browsing when using Windows. After several crashes decided to switch to Linux Mint since it's fairly user friendly, I'm familiar with Linux to be able to help with any issues and lightweight enough to run on older hardware(even though this laptop was only bought in 2019)
Performed on a HP Pavilion x360 15 laptop but should be able to work on any HP laptop that has a "locked BIOS advanced utility" as well as when attempting to install Linux to the drive states that Intel RST(Rapid Storage Technology) needs to be turned off before installing and/or the RST option is displayed in BIOS and even with the option turned off and hard drive(s) wiped to prevent existing driver confliction
If BIOS option is already disabled/turned off and warning is still persisting the Intel optane drive needs to be removed. If you go into the boot drive menu for the BIOS firmware and it displays one drive as AHCI controlled and the other as an NVMe driver the m.2 NVMe drive needs to be removed from the hardware. Haven't completely found the reasoning but I am guessing that the M.2 drive has some built in firmware that only allows it to be booted as an Intel optane RST drive due to the low memory and only acting as a RAID 0 or RAID 10 device for the windows OS. After removing the drive from the motherboard as the location is displayed in the picture below (unscrew the small Philips screw and lift the adhesive heatsink cover from the connector on the right side as well as pull the storage board straight out of the port, no need to force it that's how you break things) then reattempt to install Linux. It should now have no issues and in my case the main storage 2.5" drive has 1TB of storage which is plenty for this laptop for my family given my personal work laptop only has 256GB of storage and is still plenty for what I use it for. Before finding the cause of the issues attempting to enter the "advanced BIOS" utility appeared fruitless with no contortionist levels of keyboard mashing doing anything just except give me the regular BIOS setup utility, boot menu or anything. With this solution I am loosing out on 16GB of storage which if anything might account for a few halfway decent sized programs but fixes a lot of windows problems of obsolescence and not wanting to update to the next bloatware loaded flea bag of an OS that tried to push all of their paid services on you
Also note that removing said drive can cause HP to void your warranty (crap according to right to repair movements but I'm not a lawyer) so do this at your own risk and/or if your warranty is already expired in my case since I haven't touched this laptop in at least 4 years and also if trying to dual boot windows this will mess up your current installation and brick an OS booting. If you have files/pictures anything make sure you backup on a stable safe drive before trying to remove any hardware from a computer (ask how I know from years of building and modifying computers).