-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- I am having problems resetting the system through recovery o...

Create an account on the HP Community to personalize your profile and ask a question
03-22-2017 12:30 PM
I am being told that i require Additional free space is required when trying a reset through (F11) recovery options.
a reset just brings me back to the same place again. Anyone any ideas please. System will not boot up correctly.
Solved! Go to Solution.
Accepted Solutions
03-23-2017 07:47 AM
Hello
Seems the BCD has gone corrupt on the recovery partition due to which you would require Recovery media to fix this.
My Sugestion - Call up Hp support @1-800-474-6836 to order the media.
Alternatively you can follow the steps mentioned below to manually fix the BCD.
BCD is a software issue.
Download tool from https://www.microsoft.com/en-in/software-download/windows10 to create a bootable media
Using this bootable media to boot to the affected system (tapping F9 at boot to select boot device which will be the CD/DVD/USB on which you had downloaded the above tool)
On the Windows Setup menu
Click “Repair your computer”
Choose “Troubleshoot”
Choose “Advanced options”
Choose “Command Prompt”
Execute the following commands to re-build the BCD
Bootrec /fixmbr
Bootrec /fixboot
Bootrec /scanos
Bootrec /rebuildbcd
Type “A” to add installation to boot list
Exit the command prompt
Choose “Continue” to the system.
The unit shall be back to normal.
***If my post helped, click the White thumbs-up symbol to say thanks***
***Please mark Accept As Solution if my post solved your problem***
***Although I am an HP Employee, I am speaking for myself and not for HP***
03-22-2017 01:20 PM
Hello
Use the following document which provides a step by step explanation to perform recovery
http://support.hp.com/us-en/document/c00006110#!&AbT1%3Fjumpid=hpr_r1002_usen_link1
If you are facing issues then please provide the exact error message you get.
***If my post helped, click the White thumbs-up symbol to say thanks***
***Please mark Accept As Solution if my post solved your problem***
***Although I am an HP Employee, I am speaking for myself and not for HP***
03-23-2017 06:18 AM
Hello and thnaks for getting back to me.
Further to your earlier reply. I had already tried that and then did it again. i have also using CMD function run the following C:\WINDOWS\Systems32\Logfiles\Srt\SrtTrail.txt , after trying to delete any temp files. I cannot re-install from disc as I do not have them avaialble to me.
Please see the following txt file :
Startup Repair diagnosis and repair log
---------------------------
Last successful boot time: 24/02/2017 21:08:03 (GMT)
Number of repair attempts: 3
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = C:\WINDOWS
AutoChk Run = 0
Number of root causes = 1
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 171 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 1750 ms
Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 359 ms
Test Performed:
---------------------------
Name: Internal state check
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Boot status test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Setup state check
Result: Completed successfully. Error code = 0x0
Time taken = 250 ms
Test Performed:
---------------------------
Name: Registry hives test
Result: Completed successfully. Error code = 0x0
Time taken = 3281 ms
Test Performed:
---------------------------
Name: Windows boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Bugcheck analysis
Result: Completed successfully. Error code = 0x0
Time taken = 578 ms
Root cause found:
---------------------------
Bugcheck c000021a. Parameters = 0xffffc000acce44a0, 0xc0000034, 0x0, 0x0.
Boot critical file is corrupt.
Repair action: File repair
Result: Failed. Error code = 0x2
Time taken = 6485 ms
---------------------------
---------------------------
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = C:\WINDOWS
AutoChk Run = 0
Number of root causes = 0
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 15 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 156 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 1734 ms
Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 375 ms
Test Performed:
---------------------------
Name: Internal state check
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Boot status test
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Setup state check
Result: Completed successfully. Error code = 0x0
Time taken = 250 ms
Test Performed:
---------------------------
Name: Registry hives test
Result: Completed successfully. Error code = 0x0
Time taken = 3281 ms
Test Performed:
---------------------------
Name: Windows boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Bugcheck analysis
Result: Completed successfully. Error code = 0x0
Time taken = 578 ms
---------------------------
---------------------------
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = C:\WINDOWS
AutoChk Run = 0
Number of root causes = 1
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 156 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 1765 ms
Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 360 ms
Test Performed:
---------------------------
Name: Internal state check
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Boot status test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Setup state check
Result: Completed successfully. Error code = 0x0
Time taken = 265 ms
Test Performed:
---------------------------
Name: Registry hives test
Result: Completed successfully. Error code = 0x0
Time taken = 3438 ms
Test Performed:
---------------------------
Name: Windows boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Bugcheck analysis
Result: Completed successfully. Error code = 0x0
Time taken = 609 ms
Root cause found:
---------------------------
Bugcheck c000021a. Parameters = 0xffffc000dd489550, 0xc0000034, 0x0, 0x0.
Boot critical file is corrupt.
Repair action: File repair
Result: Failed. Error code = 0x2
Time taken = 6719 ms
I do hope this helps as I'm running out of options.
Many thanks in advancve for your help and co-operation in this matter.
03-23-2017 07:47 AM
Hello
Seems the BCD has gone corrupt on the recovery partition due to which you would require Recovery media to fix this.
My Sugestion - Call up Hp support @1-800-474-6836 to order the media.
Alternatively you can follow the steps mentioned below to manually fix the BCD.
BCD is a software issue.
Download tool from https://www.microsoft.com/en-in/software-download/windows10 to create a bootable media
Using this bootable media to boot to the affected system (tapping F9 at boot to select boot device which will be the CD/DVD/USB on which you had downloaded the above tool)
On the Windows Setup menu
Click “Repair your computer”
Choose “Troubleshoot”
Choose “Advanced options”
Choose “Command Prompt”
Execute the following commands to re-build the BCD
Bootrec /fixmbr
Bootrec /fixboot
Bootrec /scanos
Bootrec /rebuildbcd
Type “A” to add installation to boot list
Exit the command prompt
Choose “Continue” to the system.
The unit shall be back to normal.
***If my post helped, click the White thumbs-up symbol to say thanks***
***Please mark Accept As Solution if my post solved your problem***
***Although I am an HP Employee, I am speaking for myself and not for HP***
03-24-2017 12:07 PM
Hello again,
Sorry for the delay getting back to you. I followed your instructions in the Command prompt, after downloading the 'media creation tool' from the link you posted. I then followed yuor iguide and all works correctly until i type "A", after Bootrec/rebuild bcd. it then tells me the command is not recognised. Am i missing something ?
Thanks.
03-24-2017 12:59 PM
Hello
You only need that command when you are booting using the media. If its the recovery partition that you are using then type "exit" and come out of command prompt to turn off your pc.
Turn it back on to check if the issue is resolved.
If it isnt then you would need the recovery media to fix the issue, for that call up HP support.
Hope this helps.
**Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
**Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
**Although I am an HP Employee, I am speaking for myself and not for HP.
03-31-2017 12:32 PM
Hey Kevin,
Thanks for the responce, I am disappointed that the fix did not work.
But I will be happy if you can contact HP Support and get your issue fixed.
Once done do let me know about it.
And ya,
**Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
**Although I am an HP Employee, I am speaking for myself and not for HP.