I'm getting a hard drive error in Quick test

[NanaHelenLopez]

I am getting hard drive error code PK678F-8GAA9H-XD7X6K-60RE03 when I run diagnostic Quick Test

[WAWood]

@NanaHelenLopez 

That error code means your hard drive has failed and needs to be replaced.

Once you have the replacement drive, read the information below about HP Could Recovery to be used to restore your PC to working condition:

If your PC is a 2016 model or newer, you should see if you can make a bootable USB recovery drive using the HP cloud recovery tool on a working PC.

The recovery drive can then be used to install Win10 and the HP drivers and utilities that originally came with your PC.

Here is the link: https://support.hp.com/us-en/document/c06162205

[NanaHelenLopez]

That's what I was afraid of. Will the Cloud recovery tool "save" anything on my now dead hardrive? Like personal files? I have 7 years of turbotax files on it....or is there any chance of recovering them another way? 

[WAWood]

@NanaHelenLopez 

The answer to the first question is NO -- the drive will be blank and all the restore will do is reinstall Windows and the HP drivers and utilities.

As to the second, the answer is yes ...

All you will be able to recover at best from the drive is personal data. You will not be able to recover settings, website information (including user accounts and passwords) or applications.

Your best bet for recovering data now is to do the following:
1) Remove the disk drive from the old PC. If this is a SATA hard drive or a SATA SSD, this is a simple thing to do. If this is an m.2 SSD, that could be either screwed to the motherboard or soldered to the motherboard. If the second, you would need to have a techician remove it for you, or you risk seriously damaging the PC doing it yourself.
2) If you have a desktop PC with a spare hard drive connector, then connect the old drive to that. If the old drive is a SATA drive, connect both the power cable and the data cable. (This adapter is illustrated below) If the old drive is an m.2 SSD, you will need a USB-to-mSATA cable.

3) Try to retrieve the files and folders you want to save from the old drive and copy them to the new PC.

If this does not work, then you need to do the following:
1) Download and install this utility on a working PC http://www.majorgeeks.com/news/story/recover_data_in_3_steps_with_minitool_power_data_recovery_free_...
2) Run the data recovery utility to see what can be retrieved from the old drive.

If that tool does not find what you need, an alternative is Recuva http://www.piriform.com/recuva

And, if that does not work well, the best tool out there is this one, but only the demo version is free https://www.runtime.org/data-recovery-software.htm