-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Re: Installed Win7 on 15-AD129DS -Missing Driver: PC Data A...

Create an account on the HP Community to personalize your profile and ask a question
08-17-2016 03:44 PM
I have recently installed Windows 7 on my HP Notebook 15-AD129DS. In the Device manager I am missing the driver for the PC Data Acquisition And Signal Processing Controller. There is also an unknown device with no driver listed right below it in the "Other Devices" section.
I understand that this ususaly installed with the chipset drivers. But it didi not install in two different tries at the Win7 installation. The Intel site appears to be of no help, nor is their Driver Utility.
Can you lead me to the correct drivers?
Thank you in advance,
Mark
Solved! Go to Solution.
Accepted Solutions
08-17-2016 04:46 PM - edited 08-17-2016 04:46 PM
Hi:
Did you try this driver?
This package contains the driver that enables the Intel Dynamic Platform and Thermal Framework firmware. Intel Dynamic Platform and Thermal Framework provide system temperature and power utilization information for the system thermal protection to function properly. This package is provided for supported notebook models running a supported operating system.
08-17-2016 04:46 PM - edited 08-17-2016 04:46 PM
Hi:
Did you try this driver?
This package contains the driver that enables the Intel Dynamic Platform and Thermal Framework firmware. Intel Dynamic Platform and Thermal Framework provide system temperature and power utilization information for the system thermal protection to function properly. This package is provided for supported notebook models running a supported operating system.
08-17-2016 06:57 PM - edited 08-17-2016 06:57 PM
Paul,
That took care of it. I originally installed the Dynamic Platform and Thermal Framework firmware off the drivers page for the15-AD129DS (Win 7 version: SP71638.exe), but apprently that one is not the correct one.
I got rid of the unknown device problem too by disabling TPM support in the BIOS which Win7 does not support. That leaves me with clean Device Mnager.
Thank you for your help Paul, I'm extremely grateful.
Mark
08-17-2016 07:08 PM
You're very welcome, Mark.
Actually there is a hofix from Microsoft that provides for TPM 2.0 support on W7.
But unless you are running W7 Ultimate or Enterprise which support bitlocker, TPM isn't necessary.
08-17-2016 08:06 PM
You try to use another win to see how. See if it fails again
đèn led nhà xưởng đèn tuýp led đèn led
http://thegioidenled.vn/den-led-nha-xuong.html