-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Re: Memory Quick Check failed. Hard Drive quick and smart ch...
Create an account on the HP Community to personalize your profile and ask a question
02-09-2019 06:40 AM - edited 02-09-2019 06:42 AM
So, a couple days ago, our other computer failed to boot. It would bring up the HP logo and then just stop there. Doing 3 hard reboots in a row bring up a screen that says "Preparing auto repairs" but then it just sits on that screen forever.
Also, I don't know if this is a clue or just a coincidence, but a week or 2 before this, 2 of the USB ports suddenly stopped working. I had to move the keyboard and mouse to different ports. But I digress.
Unplugging the hard drive and powering up finally brought me to a screen that allowd me to test memory and the hard drive itself. I plugged the hard drive back in. It passed both the quick and smart check.
Memory quick check failed.
Failure ID: Q0FQ3S-7JG9H8-9VRV61-007U03
Product ID: F3D23AAR#ABA
So, I'm not really a computer guy, I just stumbled into getting this far. What does this mean? Do I need to replace my memory? What's my next step here in solving this issue?
Thank you
Solved! Go to Solution.
Accepted Solutions
02-09-2019 06:52 AM
Here is the support page for that PC
https://support.hp.com/us-en/document/c04108287
Indicated there, it shows two memory slots but it is unclear if the are two memory cards or one. If there are two, then remove one and run the memory test again. If that one fails, try the other one. Usually only one will have failed. If there is only one, then you can replace with one or get two, depending on the amount of memory you wish to buy. It can - Supports up to 16 GB (unbuffered) on 64-bit systems
I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the "Was this reply helpful" Yes button.
02-09-2019 06:52 AM
Here is the support page for that PC
https://support.hp.com/us-en/document/c04108287
Indicated there, it shows two memory slots but it is unclear if the are two memory cards or one. If there are two, then remove one and run the memory test again. If that one fails, try the other one. Usually only one will have failed. If there is only one, then you can replace with one or get two, depending on the amount of memory you wish to buy. It can - Supports up to 16 GB (unbuffered) on 64-bit systems
I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the "Was this reply helpful" Yes button.
02-09-2019 06:55 AM - edited 02-09-2019 07:05 AM
Thank you. This one currently just has one memory card. I may buy two depending on price, but will buy a new one at the least. THat should solve this problem and allow the computer to function normally again?
Another silly question. Is memory and ram the same thing? Or rather, what is the difference, if any?
02-09-2019 07:24 AM - edited 02-09-2019 07:39 AM
Yes, ram and memory are the same.
Here is what the support page indicates
- Single channel memory architecture
- Two 240-pin DDR3 DIMM sockets
- Supports PC3-12800 (DDR3-1600)
- Supports 1 GB, 2 GB, 4 GB and 8 GB DIMMs
Here is what the Crucial site says
https://www.crucial.com/usa/en/compatible-upgrade-for/HP---Compaq/hp-110-243w
These upgrades are guaranteed compatible when you order from Crucial.com
If you wish to only purchase one 8GB, put it in the same slot the original card was in. If buying two, buy a matched pair. ( two of the same type and cat#) You do not have to buy from them but that part is up to you.
Edit: I forgot to answer the other question. That is assuming the only problem is a ram failure
I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the "Was this reply helpful" Yes button.
02-10-2019 12:04 PM
Hi, So, I went and got the correct ram to replace mine and unfortunately, my computer is still doing the same thing.
On power up, it gets to the HP logo and just sits there indefinitely. Even the guy at the computer store agreed the issue was the ram. But putting a new one in, seems to have not fixed it.
Any other ideas?
On pwer up, I can hear the drivers and hard drive spinning up and stuff. I just am truly stumped here
02-10-2019 01:33 PM
In the first post, there is mention of other things going on besides the ram diagnostics failing. I suspect that we are back to the original problem again. Bad ram would/should not cause the USB ports to fail. Failing three starts in a row would bring up the repair screen. If that is all the farther it will go, then the next thing is to get the Windows install media and then boot to that to see if the repair part of the install media can fix it. Then, of course try an install from the Windows 10 media.
You can make the Windows 10 install media from here:
https://www.microsoft.com/en-us/software-download/windows10
With a working PC, scroll down to the "Using the tool to create installation media" and follow the directions. Then boot the problem PC to this install media.
I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the "Was this reply helpful" Yes button.
Didn't find what you were looking for? Ask the community