Missing driver PCI Simple Communications Controller

[rufflenow]

I have reinstalled Windows 7 Enterprise and there is one missing driver for the PCI Simple Communications Controller. These are the hardware ids:

PCI\VEN_8086&DEV_1E3A&SUBSYS_1815103C&REV_04
PCI\VEN_8086&DEV_1E3A&SUBSYS_1815103C
PCI\VEN_8086&DEV_1E3A&CC_078000
PCI\VEN_8086&DEV_1E3A&CC_0780
Thanks for showing me where to find the correct driver

[Paul_Tikkanen · Accepted solution]

Hi:

You need this driver for that device...

This package provides the Intel Management Engine Interface (MEI) Driver for the supported notebook models and operating systems. The Intel Management Engine Interface enables communication between the host operating system and the Intel Management Engine firmware.

https://ftp.hp.com/pub/softpaq/sp63501-64000/sp63661.exe

[rufflenow]

Thanks, that solved the problem !

[Paul_Tikkanen]

You're very welcome.

[rufflenow]

Paul, I still have some devices with drivers missing:

One is a USB Controller with following hardware ID's:
PCI\VEN_8086&DEV_1E31&SUBSYS_1815103C&REV_04
PCI\VEN_8086&DEV_1E31&SUBSYS_1815103C
PCI\VEN_8086&DEV_1E31&CC_0C0330
PCI\VEN_8086&DEV_1E31&CC_0C03

The remaining two are unknown devices with following hardware ID's:
ACPI\HPQ6000
*HPQ6000
and

USB\VID_138A&PID_003D&REV_0104
USB\VID_138A&PID_003D

Hope you can help. After that no more issues on my HP Elitebook.

Thanks

[Paul_Tikkanen]

Hi:

You need these drivers...

USB:

https://ftp.hp.com/pub/softpaq/sp66001-66500/sp66487.exe

ACPI\HPQ6000:

https://ftp.hp.com/pub/softpaq/sp62501-63000/sp62981.exe

USB\VID_138A&PID_003D:

https://ftp.hp.com/pub/softpaq/sp81001-81500/sp81058.exe

[rufflenow]

Thanks again ! All devices up and running.

[Paul_Tikkanen]

Anytime.

Glad to have been of assistance.