• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
Locked

‎01-24-2016 03:57 PM

HP Recommended
Product: Pavilion g6-1b79dx Notebook
Operating System: Microsoft Windows 10 (64-bit)

I need to access the BIOS to enable virtualization so that a program in Kaspersky Internet Security (Safe Money) will running SECURELY and properly.  This function worked fine until I upgraded to Windows 10.  Windows 10 CHANGED the setting on the BIOS.  Yes, I said it because I believe it.  Safe Money worked just fine until I upgraded to Windows 10.

 

If I had access to the BIOS, would I be asking this question??  I have already asked Kaspersky and they are telling me they can't do anything to help me.  In other words, they are stumped, too.  I have been looking high and low all over the internet for a solution and any that I have gotten do not work.  Not even here OR Mocrosft.  Soooo, here I am.

 

BTW, I am aware of others who, for various reasons, are trying to access the BIOS in order to correct problems caused by upgrading to Windows 10.

 

 

 

Erik

 

 

1 ACCEPTED SOLUTION

Accepted Solutions

‎01-24-2016 04:09 PM

HP Recommended

To Access BIOS you need to Press F10 Button when you power up the PC.

You can also Halt the PC from booting to windows by pressing ESC button and then Select F10 option to go into the BIOS.

I'm an HP Employee.The opinions expressed here are my personal opinions, not of HP.
Click on Thumbs up if my post helped you.Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

View solution in original post

Was this reply helpful? Yes No
21 REPLIES 21

‎01-24-2016 04:09 PM

HP Recommended

To Access BIOS you need to Press F10 Button when you power up the PC.

You can also Halt the PC from booting to windows by pressing ESC button and then Select F10 option to go into the BIOS.

I'm an HP Employee.The opinions expressed here are my personal opinions, not of HP.
Click on Thumbs up if my post helped you.Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

Was this reply helpful? Yes No

‎01-24-2016 04:33 PM

HP Recommended

Hello, My Friend!!!

 

And THANK YOU, THANK YOU, THANK YOU!!!

 

That worked beautifully!  I am now fully secured (Well, as best as you can for these days anyway!!)

 

I will pass this along to the other souls who have been having this issue.

 

Again, THANK YOU!!

 

 

Erik

 

 

Was this reply helpful? Yes No

‎01-24-2016 05:09 PM

HP Recommended

Hi eb0425,

 

You are welcome. :generic:

I'm an HP Employee.The opinions expressed here are my personal opinions, not of HP.
Click on Thumbs up if my post helped you.Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

Was this reply helpful? Yes No

‎01-24-2016 05:40 PM

HP Recommended
@eb0425 wrote:

I need to access the BIOS to enable virtualization so that a program in Kaspersky Internet Security (Safe Money) will running SECURELY and properly.  This function worked fine until I upgraded to Windows 10.  Windows 10 CHANGED the setting on the BIOS.  Yes, I said it because I believe it.  Safe Money worked just fine until I upgraded to Windows 10.


 

I doubt Window 10 can change your BIOS-that would be news to me.

-------- Looking for HP driver support When Windows 10 O/S isn't Supported ------
Windows 10 drivers may be available through Windows Update

Click 'Learn More' below for steps on using Windows Update to determine what drivers might be available for your product. Please be aware that HP does not guarantee Windows 10 drivers will be available from Windows Update.
Learn more
-------------------------------------------------------------------------------------------------- This is a HP USER community forum.
-----------------------------------------------------------------
BTW, Millions of folks have gone back from Win10 to their prior O/S -- something you don't hear about from MS. by WAWood but ALL to TRUE
------------------------------------------------------------------------------------------- Those that want HD Gaming should plan to invest in a Gaming Laptop to handle those requirements. Eamples GTA V or Crysis 3.
Was this reply helpful? Yes No

‎01-31-2016 02:44 PM

HP Recommended

I have exactly the same issue as the other person does but I can not acess the bios using the above procedure. Is there another way?

Was this reply helpful? Yes No

‎01-31-2016 03:02 PM

HP Recommended

Hi Andi

 

What you have to do is wait for your computers logo screen to show and then POUNCE on either ESC or F10.  What kind of computer do you have??

 

 

Erik

 

 

Was this reply helpful? Yes No

‎01-31-2016 03:17 PM

HP Recommended

I have a Pavilion g6-1b79dx Notebook PC

I tried both ways when my screen was black and it still loaded windows 10.

Should I be holding it down or continuously hitting it or only once?

 

 

Was this reply helpful? Yes No

‎01-31-2016 03:30 PM

HP Recommended

Hi Andi!!

 

When you restart or power up your laptop, when you see the HP Logo screen, hit ESC Immediately!!  This will take you to a screen with various options.  Hit F10 (leisurely, I might add) and you will have access to the BIOS.  Find what you need and make the changes.

 

I must caution you...BE CAREFUL!!!  If all you need to do is enable virtualization, do that.  Don't forget to hit Save (bottom right of screen) and your laptop will continue booting  up WITH the change in place.

 

 

Erik

 

 

Was this reply helpful? Yes No

‎01-31-2016 04:03 PM

HP Recommended

This did not work for me. I hit esc the second I saw the hp logo. The within a second the windows icon came up. What could be stopping me from accessing it? Is there any setting I should check/change?

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.