-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Secure Boot doesnt work

Create an account on the HP Community to personalize your profile and ask a question
10-24-2024 10:08 AM
I currently use a HP ProBook x360 440 G1 from 5 years ago. I've tried to get windows 11 but I need to enable secure boot. But my laptop always shows "Bootloader not found Hard disk - 3F0" error.
I enter BIOS -> BIOS SETUP then go to ADVANCED and go to BOOT OPTIONS then turn off LEGACY BOOT while keeping UEFI boot on, after that I go to Secure boot Configuration and turn on "LEGACY BOOT DISABLED AND SECURE BOOT ENABLED" but when I turn on my laptop it doesnt work. Why is this?
10-24-2024 10:20 AM
Hi @Saig39
That is because you changed from legacy to secure boot and the disk partition does not recognize the UEFI, then you must reinstall windows, if you want to return to the operating system you must activate the legacy again.
- if I can help solve your question or issue, please click on ACCEPT AS SOLUTION or click the YES button if my answer was helpful.
10-24-2024 12:42 PM
Yes, first switch to Secure boot, and then you must reinstall windows again from an installation USB in UEFI, use Microsoft's media creation tool.
- if I can help solve your question or issue, please click on ACCEPT AS SOLUTION or click the YES button if my answer was helpful.