Stuck on Automatic Repair loading screen

[HanaThomas]

My computer turns on to the preparing automatic repair screen but won't load, the spinning circle won't even show. I tried safe mode but it was pretty much the same, it would get to please wait and then not load.

[praveen196]

@HanaThomas Welcome to HP Community!

I understand that the laptop is stuck on the automatic Repair loading screen.

Do not worry. I will try to fix the issue.

1. Try hard restart/hard reset.

Press the power on-button on your PC and hold it for about 5-10 seconds until your computer powers off completely.

Remove and unplug any external peripherals and accessories.

Press once the power-on button to turn on the PC and wait if it will start now. Wait...

If it still fails to load properly, go ahead with the next steps

2. Perform some basic hardware checks to rule out hardware problem

- Please, shutdown the computer using the power button (pressed and hold for a few seconds until PC powers off)

- Power the computer back on.

As soon as you press the power-on button, immediately begin hitting the Esc button (like tap-tap-tap) before any logo appears. This should open a HP Startup Menu

- Choose F2 to open System Diagnostics. Follow the on-screen instructions to perform System Test >> Quick test.

This will check major hardware componets for issue (do it just in case) . Here is more info >> https://www.youtube.com/watch?v=6JXUp43ahHA

If there are no system checks/no quick tests, perform HDD (hard disk drive) and RAM check (memory check).

Let me know the test results. If the tests pass without issues, continue. If not, please, let me know

3. Repeat steps 1-2 above but when HP Startup menu opens, please choose F11 for System Recovery options.

The computer should boot from it's recovery partition to open you various recovery options. Note, that F11 option will only work if the recovery partition is there (not deleted) and intact. From there, you have prenty of options to choose from. Every HP computer comes with recovery partition present to assist in tough moments.

Please, perform "System Restore" first in an attempt to fix the issue. Please, restore back to previous days (restore point) where the issue was not present. Here is more info:

>> http://support.hp.com/us-en/document/c03327545#AbT5

>> https://www.tenforums.com/tutorials/4588-system-restore-windows-10-a.html

Let me know how that pans out,
If you feel I was helpful, simply click on Accept as Solution to help the community grow,
That said, I will have someone follow-up on this to ensure you've been helped,
Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.
 

[HanaThomas]

1. For the hard reset, it just turns on normally after and freezes on the automatic repair loading screen.

2. All passed

3. Like i said I can't do this one because my computer freezes on a loading screen after pressing f11

Oh and I don't know if this will help but this computer has had problems before, every time it goes completely dead it'll get stuck on the automatic repair loop until I reset it. This issue also began after it went dead.

[praveen196]

@HanaThomas

Thank you for the update.

In that case, I would suggest you contact our phone support. They will help you.

Here is how you can get in touch with phone support.

1)Click on this link - www.hp.com/contacthp/

2)Select the product type.

3)Enter the serial number of your device or select let HP detect your product option.

4)Select the country from the drop-down.

5)You should see the HP phone support number or Chat option listed.

Have a nice day!!