• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended

ok... recovery finished and rebooted once with a blue screen then rebooted again fan running on high and a black screen with a flashing cursor thats it for about 10 mins now..then "Operating System not found"  I am ready to install xp pro on a diff machine with this drive and re install in this laptop.

 

Any other suggestions?

 

Michael

HP Recommended

Did you read my previous reply?

 

**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***

HP Recommended

Yes and i will follow your suggestions.  Thank you for your help.

 

HP Recommended
 
HP Recommended

Download the ICH8 driver and extract it to a folder with 7Zip or other unzip utility. Install nLite and run it according to the tutorial in the link found in XP Guide.

 

If it isn't detailed enough, Dan has a complete guide on SATA slipsteaming. Look at the section for "models with GL960, GML960, GM965 or PM965 chipset" HERE

**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***

HP Recommended

As mentioned in the XP Guide_most XP drivers from V6700TX will work for your model. Install Intel Chipset Installation Utility for ICH8 first and reboot before other drivers.

(see below also before continuing with other drivers):

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&lang=en&dlc=en&product=3651452


Nvidia Graphics:

 
Or latest Nvidia from XP Guide should also work.


Some of the drivers above require .Net,MS UAA and Windows Installer 3.1 first.

MS UAA(required with a reboot before Realtek audio):
 
OR>>MS UAA for XP SP3:
 


.Net Framework(before Quick Launch):

http://tinyurl.com/758p8


Windows Installer 3.1(before wireless):

http://tinyurl.com/9cg2y
-------------------------------------------

**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***

HP Recommended

Thankyou for all of you help. I tried to install x64 vista from the recovery disk's one more time because i thought it should work but i was able to get most of it done by putting a xp disk in the dvd drive after the 2 disks were finished and pressing the power button when it hung also waiting a couple of minutes (to cool down)??? thought maybe it was a issue... not any way it got through most of the recovery not sure the percentage tho...(FAIL!!!!) I followed the info you posted and got xpSP3 loaded and then installed the drivers and all is fine now. As far as i can see, think that that i have tested everything. One issue that i found is when i plug a ext. monitor in and hit Fn #4 i get the small screen above the task bar but no output to the monitor???? I still have to test the Hdmi output as i need to get a cable...

 

 

anyway kudos++++ I have learned a lot from this Experience

 

 

Michael

HP Recommended

hey...i tried pressing f11 key while startup and nothing comes up and i also tried making the partition active thing bt its greyed out...i had my system upgraded to vista frm xp sometime back and i think thats the reason i don  hav the recovery partition drive now...i am looking for restoring factory settings since some virus ate up all the files and i cant access anything bcoz all drives r showing me nothing wen i open them...plz help...

HP Recommended

I have a Compaq Presario CQ57 Notebook PC.

 

Once I try pressing the f11 key on the startup menu i see a cursor on the screen blink twice and then it will boot up the original operating system.

HP Recommended

My dear you make recovery disk as active first this will make your system boot from recovery and you know your recovery manager does not recover window to it orignal factory condition but dont worry ...

                           system is facing boot problem ... first you have to make your window partition bootable using 

any window cd (window 7, or 8 ) repair using cmd

set your boot files of window use 

1- bootrec    /scanos

2-bootrec    /fixmbr

3- bootrec   /fixboot

4- bootrec  /rebuildbcd

 

this make your window full boot 

your recovery manager will work properly ...... if you ..

www.kalatrack.blogspot.com

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.