Unable to Start- BIOS Update Fail- diagnostics log error codes 090D; 0305; 0303

[JMBA1143]

HARD DISK TEST RESULTS: HARD DISK 1 FULL (305)

HARD DISK HITACHI HTS543232A7A384 -- ATA DEVICE
_________________________________________________
Model :
Caption : Hitachi HTS543232A7A384 ATA Device
Device ID : \\.\PHYSICALDRIVE0
SCSI BUS : 0
SCSI PORT : 0
PARTITIONS : 4
PNPDeviceID : ide\diskhitachi_HTS543232A7A384___________________ES20A60W 15&271B F5AC&0&0.0.0

[RESULT]
Couldn't performthe screening test because couldn't detect 2 HDDs on this system
C:\SYSTEM.SAV\UTIL\MBRINST.EXE/INI C:\SYSTEM.SAV\UTIL\MBR.INI /U /Q

ECHO MBRInst returned %errorLevel% >>c:system.sav\logs\MBRINST.LOG

=======================================================================
HP Advanced System Diagnostics - Version 3.6.1.0
[ www.hp.com/go/techcenter/startup ]
======================================================================

System Information
Model HP 2000 Notebook PC
System ID 3676
Product ID QE282UA#ABA
Warrantry Start Date 12/16/2011
Processor Type Celeron(R) Dual-Core CPU T3500 @2.1Ghz
Processor Speed 2000 Mhz
Memory Size 3072 MB RAM

BIOS Date 11/08/2011
BIOS Revision F.32
BIOS Vendor                                   Insyde
Serial Number [Personal Information Removed]
UUID Number 470490AC-1882-BB29-F71C-DB2907BD5243
Product configuration ID 0584100003204A10002620100
System Board CT Number PCAJFB67V1U95V
Factory installed OS Win 7
Keyboard Controller Revision 29.29
WLAN FCC ID TX2-RTL8188CE
-----------------------------------------------------
Battery Information

Battery 1:
Device Name MU06047
Location Primary
Manufacturer 13-42
Serial Number 23078 10/31/2011
Capacity 47000 mW.Hour
Voltage 10800 mV
Chemistry Lithium-ion
-----------------------------------------------------
HDD Information

Type ATA
Model Hitachi HTS543232A7A384
Firmware Version ES20A60W
Serial Number E20B12C7CGYS1S
Capacity 320 GB
LBA48 Supported
SMART Enabled
===========================================================

Start-Up Test

SMART Check: PASSED
Short DST:  FAILED

==========================================================
DIAGNOSTIC LOG      RESULT TIME
090D                          05122019-160318
090D                          05122019-160200
0305                          05122019-133817
0305                          05122019-132300
0303                          05122019-123436

WAS UNABLE TO START IN SAFEMODE  COMMAND PROMPT

WHERE AND HOW CAN I CREATE AN EXTERIOR RECOVERY  MEDIA TO BOOT FROM

PRIOR TO INCIDENT LESS THAN 50GB OF HDD WAS USED OUT OF TOTAL OF 320GB  SO I DON'T UNDERSTAND THE DISK FULL MESSAGE.

[asmita6658]

Hi @JMBA1143

Welcome to the HP Support Community. 

Refer to this document for steps to create a recovery media - HP PCs - Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)

Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!