What is the “defaultuser1” password for Power On Authtentication?

[RockyRZ]

I tried to factory reset and now I’m stuck…

[WAWood]

@RockyRZ 

I can certainly understand the desire to do factory resets -- given the prevalent view that such an action, though extreme, will fix a variety of mysterious problems and return a troublesome PC to working condition.

Problem is -- that very often is NOT the case and if there is any hardware issue at all, which is nearly always the cause with a SLOW PC (which is why most folks do the factory resets), you end up trashing your PC and rendering it useless. So, you trade a SLOW PC for a non-working PC. Not a good trade -- and certainly not what you intended.

BIOS and power-on passwords are contained in the firmware that is present inside the BIOS chips -- which are soldered to the motherboard and thus, are not replaceable. So, you can't just buy a replacement chip and swap them. Also, neither your nor HP can reset the BIOS password on the current motherboard. Thus, replacement of the motherboard is required with one that has a BIOS chip that does not have a password in the firmware. This is very expensive to do and can often cost more than simply replacing the PC

If you are not prepared to spend the money to get HP to replace the motherboard, you would have to take the PC to a local repair facility to see if they can do anything for you -- but we can not assist in that in any way.