Windows 7 Installation

[Mulwa]

No drivers were found make sure that the installation media contains correct drive then click ok

[Paul_Tikkanen]

Hi:

See if the storage controller drivers that I zipped up and attached below allow W7 to 'see' the drive.

Download and unzip the driver folder.

Copy the folder to a USB flash drive and when you are at the screen that indicates no drivers were found, click on the Load Driver option at the bottom of the window and browse to the storage controller drivers you copied to the flash drive.

If you check the box, it will only include the compatible driver.

Hopefully W7 will see the drive and install.

[Mulwa]

Hello,

Thanks for your respond and the drivers. however after installing , it gives me the blue screen as attached.

[Paul_Tikkanen]

You're very welcome.

Unfortunately, I don't know what to do about that issue because those were the storage controller drivers on your notebook's support page and they should have worked.

[Mulwa]

hello,

will bios update help?

[wiviwol947]

Hello there:

Check whether the capacity regulator drivers that I zoomed up and appended underneath permit W7 to 'see' the drive.

Download and unfasten the driver organizer.

Duplicate the organizer to a USB streak drive and when you are at the screen that demonstrates no drivers were discovered, click on the Load Driver choice at the lower part of the window and peruse to the capacity regulator drivers you replicated to the glimmer drive.

In the event that you really take a look at the container, it will just incorporate the viable driver.

Ideally W7 will see the drive and introduce.