-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Windows 7 drivers for HP Envy x360 m6-aq103dx convertable

Create an account on the HP Community to personalize your profile and ask a question
02-15-2017 06:01 PM
Hello,
A client requires laptops still downgraded to Win7. Laptop came with Win10 and unable to find Win7 drivers that work properly for this laptop. Any ideas?
Thanks,
Brendan
Solved! Go to Solution.
Accepted Solutions
02-15-2017 07:49 PM
Hi:
You are going to have a major problem finding all the drivers you need for W7.
Intel, Microsoft and HP are not supporting any Kaby Lake PC's for any other OS but W10.
And there will be some sensors, etc for which there are no W7 drivers.
There is one person on this forum who clains to have figured out a way to get the Intel graphics driver to work.
I have posted his suggestion below, last post. You will need to know how to find the hardware ID for the graphics adapter, because I highly doubt it will be the same as the one in the model you are working on.
You may have to do this to the W10 Intel graphics driver on the m6's support page.
Here are the wireless and bluetooth drivers.
USB3:
Card reader: Download, unzip and run the setup application from 1st file listed at the link below.
02-15-2017 07:49 PM
Hi:
You are going to have a major problem finding all the drivers you need for W7.
Intel, Microsoft and HP are not supporting any Kaby Lake PC's for any other OS but W10.
And there will be some sensors, etc for which there are no W7 drivers.
There is one person on this forum who clains to have figured out a way to get the Intel graphics driver to work.
I have posted his suggestion below, last post. You will need to know how to find the hardware ID for the graphics adapter, because I highly doubt it will be the same as the one in the model you are working on.
You may have to do this to the W10 Intel graphics driver on the m6's support page.
Here are the wireless and bluetooth drivers.
USB3:
Card reader: Download, unzip and run the setup application from 1st file listed at the link below.
02-16-2017 01:03 PM
Thank you Paul those drivers worked to get me up and going. The only thing missing is the PCI Simple Communications Controller, but I think we can get by without it until the company gets up on Win10!
Appreciate the help as always,
Brendan
02-16-2017 01:07 PM
You're very welcome, Brendan.
A long shot, but see if this driver works...
This package provides the Intel Management Engine Components Driver for supported notebook models running a supported operating system.
ftp://ftp.hp.com/pub/softpaq/sp76001-76500/sp76159.exe
Were you were able to modify the graphics driver to get the graphics to work properly?