07-03-2020 02:08 PM
I don't know why it happened 3 days ago. When I turned on the laptop it started Automatic Repair and would take 178 hours to finish.
I tried going to BIOS, troubleshooting, recover my PC by pressing f11 but at a certain point it leaves the screen blue and does nothing after wards.
These are the things that appears frequently now please see pics
Also my laptop has two hard drive one is M.2 SSD and other is traditional HDD that came preinstalled.
Please help me fix this issue
07-03-2020 02:22 PM
The first screen is indicating you need installation media to fix the problem.
If you have your data backed up you can, for the cost of a 32 GB USB flash drive, make your own bootable USB recovery drive that will reinstall W10, the drivers and the software that originally came with your notebook, by using the HP cloud recovery tool.
Here is an info link for how to use that utility...
07-04-2020 06:01 AM
Thanks for the response.
I followed the exam same procedure as suggested in the video for hp cloud recovery tool.
However it took me 2 hours to complete the recovery drive process using cloud recovery tool.
I went to BIOS and enabled the lagacy mode and selected USB recovery drive for boot.
A loader appeared and after this I saw this screen with nothing happens.
Please help me out
07-04-2020 06:52 AM
You're very welcome.
Run the hard drive diagnostics test (F2) in the menu of options when you press the ESC key (as if you were going to boot from the USB flash drive, or go into the BIOS).
See if the hard drive passes the tests.