Wont boot up

[Curssy]

When I turn on my laptop now, it's just a black screen. But if I press F1 or F10 or F11 it will show on the bottom left (F11... System Recovery) but it wont get any further than saying that. Screen just stops there. I cant get anywhere past that. 

[Curssy]

Update: Was able to get to BIOS but it says theres no hard drive or boot drive. Can I just buy a new M.2 and that'll fix the issue?

[praveen196]

@Curssy Welcome to HP Community!

Please provide the correct product number.

Note: Please ensure the complete product name/number for a quicker response from the community, as we need to know what we are dealing with to provide an accurate solution: 

Click here for steps on finding the information we need!

Remember: Do not share any of your personal information such as serial, phone number, email ID, etc.

http://support.hp.com/us-en/document/c03754824

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[xch]

I have the same issue after Windows upgrade - any solution?

[praveen196]

@xch

Please provide the correct product number.

Note: Please ensure the complete product name/number for a quicker response from the community, as we need to know what we are dealing with to provide an accurate solution: 

Click here for steps on finding the information we need!

Remember: Do not share any of your personal information such as serial, phone number, email ID, etc.

http://support.hp.com/us-en/document/c03754824

Have a nice day!!

[xch]

Ιt's a 13-s102na Pavillion with s/n 8CG6102MLV. Thank you!

[praveen196]

@xch

Thank you for the information.

Please perform the below steps and check.

Hard Reset:

1) Shutdown the computer.  

2) Unplug all the Adapter and peripherals connected.  

3) Remove the Battery. ( not for Built-in Battery computer ) 

4) Press and hold down the power button for 15 to 20 seconds.  

5) Plug-in the Adapter and put the Battery back into the computer if it's a (removable battery)

6) Try to turn on the computer and check, If the issue persists continue next step

Set BIOS default and restart:

1. Restart your notebook.
2. During startup, press F10 repeatedly until the BIOS menu is displayed.
3. Once the BIOS menu is displayed, press F9 to restore factory defaults.
4. Select Yes to confirm.
5. Press F10 to save changes and exit.
6. Select Yes to confirm.
7. The computer restarts using the default settings.

Please perform the below steps on the computer to run a System Test

- Shut down/Turn off the computer

- Once the computer is completely Shut down/Turned off

- Now press the power button once to turn on the computer and immediately start pressing/tapping the F2 key on the keyboard

- This should open the UEFI Diagnostic screen on the computer

- Please select System Test and then select Extensive Test

Have a nice day!!

[xch]

Thanks for your help!Unfortunately none of these steps worked. The test gave back the following message 0U7L73-84JA90-GXGK6J-60TM03 and N9Q89EA#ABU

Any others thoughts welcome!

[praveen196]

@xch

Thank you for the information.

According to the failure code, the issue with the hard drive.

In that case, I would suggets you conatct our phone support and check for the support option. They will help you.

Here is how you can get in touch with phone support.

1)Click on this link - www.hp.com/contacthp/

2)Select the product type.

3)Enter the serial number of your device or select let HP detect your product option.

4)Select the country from the drop-down.

5)You should see the HP phone support number or Chat option listed.

We are experiencing longer than expected wait times to reach an agent due to the CoViD-19 impact and there might have been issues in you getting the expected resolution on the issue. 

Have a nice day!!