memory integrity not functioning

[fastmovingwater]

core not able to scan or turn on to protect codes 

[A_Gayathri]

Hi @fastmovingwater,

Welcome to the HP Support Community

I understand you are facing an issue with your HP Notebook - 17-Ca1004cy memory integrity not functioning. The screen is not turning on Not to worry I will help you to get a resolution to resolve the issue.

Please try the following Troubleshoots steps. 

1.    Turn off the Unit.

2.    Disconnect the AC adapter.

3.    Remove any discs from the disc drive.

4.    Remove memory cards from the card reader slot.

5.    Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives, and USB flash drives.

6.    Disconnect the AC adapter press and hold the power button for approximately 15 seconds.

7.    Reconnect the AC adapter, and then turn on the computer.

Step 2

Turn off the unit and please press and hold the Windows key + letter B key and the power button together for 30 seconds after 30 seconds, 1st release the power button but keep holding the Windows key and B key for ten more seconds and then release these two keys If done correctly, you will see the display flashing once. Please attempt it thrice as this step and Restart the unit

Step3

The unit has to be turned off, Press Win+ V while holding these two keys then Press the Power button, continue to hold all three keys for 30 seconds and then release the Power button first and then release these two keys Please attempt it thrice  and then you may get a Pop-Up CMOS Check and it will restart the unit 

Even if you don't get a Pop-up restart the unit manually after 3 attempts.

After the above  troubleshooting steps if the unit  turns on 

Please  update Windows and HP support assistances updates 

And update Bios and other drivers please click on the link. to update the drivers. 

The primary cause of memory integrity not working on Windows is your drivers. When they become outdated or corrupt, you are likely to run into this problem. Likewise, if your system is outfitted with incompatible drivers, the memory integrity feature may stop working.

The error message itself usually explains where the problem lies, so fixing the problem is simple. You can fix faulty drivers, repair corrupted system files, update your operating system, revert an update, or remove incompatible drivers. Let's discuss some fixes to get the feature working again.

Identify and Fix Driver Issues

In most cases, the primary cause of the problem under discussion is outdated or incompatible drivers, so let's start by checking your drivers. To begin with, uninstall any third-party drivers you installed recently. After that, open the Windows Security app, click on the Device Security tab from the left sidebar, and click on Core isolation details.

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!