-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Re: roll back BIOS update possible??

Create an account on the HP Community to personalize your profile and ask a question
07-02-2017 10:11 PM
I just received my new Envy x360 yesterday. after setting it up and using it all day, it ran fine and quiet. this morning HP support assistant notified me of updates and messages. there were 3 updates, 1 was a BIOS update, 2nd was a bluetooth, and cant remember 3rd but think it had to do with realtek. Anyway, today, my fan is either on screaming 4 or howling 5 speeds. yesterday the fan was quiet with a slight whirr 2 to below screaming 3 while installing things, streaming video etc, nothing like today. HP cool sense is toggled on. the laptop is sitting on a curved cooling pad. the fan runs even there's nothing on the desktop open. Would upgrading the BIOS cause this symptom?? again yesterday the laptop ran just fine. today it is blowing hot air out the back port. Any way to roll it back? Anything else to check? thanks for any suggestions.
07-03-2017
04:02 PM
- last edited on
09-17-2026
06:22 AM
by
Raj_05
Hello @rhsortho,
Welcome to the HP Forums.
I would be happy to help you with your Envy x360 15-bq051nr.
I understand you have updated your Envy x360 from HP support assistant which was notified.
I recommend you to follow the below steps to resolve the issue.
BIOS Update issues
Start with a hard reset to release any excessive static on the PC:
- If Windows is open, click Start and then Shutdown.
- If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.
- With the power off, disconnect the power cord from the back of the computer.
- With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.
- Reconnect the power cord and turn on the power.
Attempt to reset or recover the existing BIOS (if the recent update was interrupted): Click here
(restoring BIOS on notebook: http://support.hp.com/us-en/document/c02693833)
Step 1: Verify the current BIOS version installed and the correct ROM Family SSID for your PC
Step 2: Find the BIOS updates
Step 3: Download and install the BIOS update
For more details: Click here
(Notebook bios update:https://support.hp.com/us-en/document/c00007682)
Thanks for being a part of the HP community.
Please let me know if this helps resolve the issue by marking this post as "Accept as Solution".
If you require further assistance, let me know and I will gladly do all I can to help. If
you wish to say "Thanks" for my efforts, click the "Thumbs Up" to give me a Kudos.
A4Apollo
I am an HP Employee