HP 470 G8 - NVME not recognized on WIN PE

[DTAM-975]

Hello,

I have a problem. I bought an HP 470G8. I need to install a windows 10 image from Win PE. But my NVME SSD is not recognized by win PE. Can you help me please (the driver is missing)?

Can you help me please?

Best regards

[CharlieItuah1]

See if this driver would work out, maybe the challenge is coming from the Win PE driver that you are using.

http://ftp.ext.hp.com//pub/caps-softpaq/cmit/softpaq/WinPE10.html

http://ftp.ext.hp.com//pub/caps-softpaq/cmit/HP_WinPE_DriverPack.html

[DTAM-975]

Thank you for your answer. I try all but nothing work out.

[CharlieItuah1]

Okay, would you prefer to install the Windows 10 operating system with a bootable installation disk?

Since the WinPE is giving challenges, an alternative method can be tried at this point.

[DTAM-975]

we have a pre-configured image for our network. Hence the need to use Win PE to install our .wim image.

[CharlieItuah1]

There is another fix you can try out. Have a look at this resource and see if it works for you.

https://www.aioboot.com/en/install-windows/

[Paul_Tikkanen · Accepted solution]

Hi, @DTAM-975 

See if slipstreaming the Intel storage controller driver that I zipped up and attached below works for you or if there is a way to manually browse to it during the WinPE installation script load the driver from there.

[DTAM-975]

it works. Thank you very much!

[Paul_Tikkanen]

You're very welcome. 

Glad to have been of assistance. 

[DTAM-975]

I have an other problem. When i install my WIM, i restart the computer and i have a bluescreen. The WIM work on other HP models (i think before inter 11th gen). I don't know what to do, i try to disable secure boot, nothing. i try to format the entire drive, the formatting worked fine. I reinstall the WIM image and I still have a bluescreen.

Have you ever had this problem?

Best Regards