cancel
Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
114
Flag Post
HP Recommended

HP AC Power Control isn't grabbing the "Low Battery Level" setting

15-d089wm
Microsoft Windows 10 (64-bit)

I have an HP 15-d089wm.
Its HP AC Power Control system isn't grabbing the "Low Battery Level" setting in the currently active PowerManager profile.

It always goes to 15% battery before running off the cord.

And not what the "Low Battery Level" is set to in the active PowerManager profile.
Is there some registry entry I can use to force the Power Control system to actually go down to what I've set?

I know the software for managing it is not what runs the HP AC Power Control system.

As it still runs at the specified "Peak Period" even with the software removed from the computer.

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
2,719 2,721 119 208
Message 2 of 2
60
Flag Post
HP Recommended

HP AC Power Control isn't grabbing the "Low Battery Level" setting

@GazbonicAcid Welcome to HP Community!

 

I understand that you would like to change the low battery level settings.

 

Do not worry. I will try to fix the issue.

 

Please open the control panel, click on the power option and click on Change advanced power settings and scroll and search for Low battery level and change the on battery percentage. As shown in the picture.

 

 

If the issue still persists, please perform the below steps:

 

 

Unplug the charger and use the laptop until the battery drains to 15%. 

Turn off the laptop and turn it back on after 30mins. 

Reinstalled Microsoft ACPI-Compliant Control Method Battery under device manager: 
1) In the search box, type, and open “Device Manager”.  

2) Expand “Batteries”.  

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.  

4) Click on “Uninstall”.  

5) At the prompt put a check in the box to remove the current driver  

6) Shutdown the computer.  

7) Remove the battery for a minute and then put it back in.  

😎 When the computer comes back up it should automatically find the driver.  

9) Go to Device Manager.  

10) Expand Batteries.  

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

12) Click "Search automatically for updated driver software"  

Do the same thing with Microsoft ACPI-Compliant Embedded Controller.  

Restart the computer and the issue should be fixed. 
 

Additional help can be found in the below articles: 

 

Battery Charging Delayed When Operating Notebook in High Ambient Temperatures 

 

Battery Does Not Charge when Using a Voltage Adapter with the Power Adapter 

 

Battery Indicator Light Turns On and Off While Battery is Charging 
 

Please update the BIOS.

 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation