HP Mini 110-3000 Windows 7 isn't working (SOLVED)

[MG_T0RR3S]

Hello,
My HP Mini won't work (yes, I know those are old lol but still). I try to turn it on and it gives me this message;

"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next".
3. Click "Repair your computer"

If you do not have this disc, contact your system administrator
or computer manufacturer for assistance.

Status: 0XC000000f
Info: The boot selection failed because a required device is
inaccessible."

I have no idea how to fix this problem, and have looked all over the internet and found nothing.
I even tried to make my own installation disc/ usb but failed. (I don't have a disk)
I have already tried a hard reset. Somebody please help 😕

(ps not sure if the windows 7 is 32bit but i know its a windows 7 starter with an Intel atom processor)

thank u in advance

[KrazyToad · Accepted solution]

@MG_T0RR3S

You could try downloading the HP USB Recovery Flash Disk Utility from this Link: https://support.hp.com/in-en/drivers/selfservice/swdetails/hp-mini-110-3000-pc-series/4166077/swItem... using another computer

Then boot from the newly created HP USB Recovery Flash disk and reset the Notebook back to Factory Settings

Keep me posted 😊

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

[MG_T0RR3S]

Thank you!! I just wish I had done this instead of making my own recovery USB disk. I feel your way would've been much easier.

But, if you know how to fix the wi-fi on it maybe help me out? it says a driver needs to be fixed but I can't fix it without wi-fi.
If you could offer any help, it would be greatly appreciated. Thank you. 

[KrazyToad]

@MG_T0RR3S

If you have an Ethernet cable, you could try going online with the Wired connection