-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Software and How To Questions
- Re: How to enable fingerprint scanner in BIOS

Create an account on the HP Community to personalize your profile and ask a question
11-02-2026 09:42 AM
Hi @UsamaTahir,
On the ZBook 15 G5:
- Restart and press F10 to open BIOS Setup.
- Go to the Advanced tab and open the built-in device / port options. Make sure the Fingerprint device is enabled, then save with F10.
- In Windows, install the fingerprint driver for your model from https://support.hp.com/drivers
- Go to Settings > Accounts > Sign-in options > Fingerprint recognition (Windows Hello). You'll need to set up a PIN first.
I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).
11-03-2026 10:57 AM
Hi @UsamaTahir,
Just checking in: were you able to solve the issue with the steps above? If it worked, please click "Accept as Solution" on the reply that helped so others with the same problem can find it, and the "Yes" button. If not, let me know what you see and I'll gladly keep helping.
I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).