Missing driver files in sp32492 (Intel Matrix Storage Manager)

[elevNFC]

I am attempting to slipstream SATA drivers for the laptop into a Windows XP Professional SP3 x86 ISO. However, no matter if I extract files from the sp32492.exe file via 7-Zip or command prompt as instructed by HP Support's AI Search or a White Paper, some files necessary for slipstreaming, especially with tools such as nLite in my case, are missing in the SoftPaq .exe file. I.e. .inf, .sys, and .oem files are not found after extracting every file from the .exe file. I also checked out another post's solution but the link provided in the solution is currently broken. Furthermore, I ran the .exe file on the laptop yet still cannot find the necessary driver files for slipstreaming. Where and how else I can safely obtain the necessary legitimate files, preferably from either HP or Intel, for slipstreaming drivers for the laptop?

[Paul_Tikkanen · Accepted solution]

I have zipped up and attached the XP 32 bit drivers you need for your PC, below:

I extracted them from the HP 6910p's support page which also contains the driver for the nc6320.

HP Compaq 6910p Notebook PC Software and Driver Details

Your PC uses the Intel(R) ICH7M/MDH SATA AHCI Controller driver.

All of the files you need are there, because I have used this file several times with slipstreaming and loading from a USB FDD.

I actually prefer loading the drivers with the USB FDD (F6) method.

[elevNFC]

Thanks! It works as intended and installation USB was able to load the slipstreamed drivers! Also, thanks for the additional info in saving me trouble from flawed assumptions!

[Paul_Tikkanen]

You're very welcome.