As I understand there's an issue with the screen colors,
Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details:
Have you been able to adjust the color or have a color of your preference before?
Did you check if the issue persists on an alternate/external monitor?
While you respond to that, here's what you need to do:
If you haven't, please try an alternate monitor to understand if this is either a hardware or a software failure,
to check if you can adjust the color on the monitor and let me know if that makes a difference if the monitor works fine according to your preference or you don't have an alternate monitor to check:
Re-install the graphics card drivers & update it from the official HP Website: Click here
Update the BIOS
download Nvidia Geforce from website
If the issue persists, try the below steps:
Open the display adapter properties or advanced display settings to view the modes, set the refresh rate, or manage the color and other advanced settings.
To open the advanced display settings or display adapter properties, select your operating system:
Windows 10: Search for and open Change display settings. You can also right-click the desktop and open Display settings. Scroll down to Related settings, then click Display adapter properties.
Figure : Opening the Display adapter properties
In Windows 7: Search for and open Adjust screen resolution, then click Advanced settings.
Figure : Opening the Advanced display settings
Click a tab to adjust the corresponding settings.
Your computer might have more tabs than those listed here. Many video card manufacturers provide settings designed for their video hardware. These extra settings vary by the type of video hardware used and are not discussed here.
Color Management: The Color Management tab provides settings to change the color output to the monitor. Typically, you would not use Color Management unless a special situation called for it, such as matching the colors on the monitor to the colors on a printer. Adjusting this setting changes the color output for everything displayed in Windows and should be done only if needed.
Click OK to save your changes and close the window.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".