• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
Pavilion dv6-6b55er

Hi.

I'm sorry for my bed English.

Notebook: Pavilion dv6-6b55er, Windows 7 Ultimate x64.

The problem is the graphics switching Intel 3000 and AMD HD 6490.

Installed chipset drivers from the website HP.

1. An error occurs when you install the toggle graphics driver AMD/Intel Switchable High-Definition (HD) 8.15.10.2476 Rev. -> "This system does not meet the system requirements for installing the software" (img 1).

 img1.jpg

2. I'm downloading driver with site Intel for Intel HD 3000 and from the site HP AMD High-Definition 8.882.2.3000 -> in the device Manager, you can see that the installation was successful, but the system works on the VGA adapter + disappears the control panel to configure the graphics and Intel, and AMD.

3. Often, when you install the AMD driver black screen and the computer hangs indefinitely. Next, you cannot perform a normal Windows 7 boot (only through system restore).

Any help would be appreciated whether it is art or manual. 

Thank You

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Thank you for your help. Solved the problem by installing drivers from this site (6 times).

It is only strange that the drivers from the HP website did not.

Спасибо.

 

http://leshcatlabs.net/2013/12/10/leshcats-catalyst-13-11-beta-9-4-unifl/

 

 

View solution in original post

5 REPLIES 5
HP Recommended
HP Recommended

Thanks for the solution but not working.

Installed the driver that you prompted. On half of installations black screen was set up with a carriage. Waited an hour nothing has changed. Rebooted forcibly. Chose normal startup of Windows. As can be seen from the screenshots in the system there is a record of the devices, but at the same time they are in conflict. Somewhere evaporated Catalist and the program is Intel graphics. Tell me how to fix it please.

 

 wcVm0tws7EM.jpg15.png

rwiq6VgHv8A.jpg

HP Recommended

You have a couple driver issues going on there. I see the ethernet is not installed right either. 

 

I think you need to scrub off all the old video drivers and install the one I suggested to a basic vga adapter. 

 

https://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx

HP Recommended

With the Internet adapter I'll deal somehow. Followed your advice. It didn't work.

Any other suggestions as to what it might be?

What is the probability that a hardware error?

HP Recommended

Thank you for your help. Solved the problem by installing drivers from this site (6 times).

It is only strange that the drivers from the HP website did not.

Спасибо.

 

http://leshcatlabs.net/2013/12/10/leshcats-catalyst-13-11-beta-9-4-unifl/

 

 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.