-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Video, Display and Touch
- Re: Touchscreen is unresponsive for 2s after using active pe...
Create an account on the HP Community to personalize your profile and ask a question
03-22-2017 09:44 AM
Has anyone noticed the long palm rejection delay of the touchscreen after using the pen? For me it takes about 2 seconds of withdrawing the pen for the computer to respond to touchscreen input. It is very disruptive while taking notes since I have to switch quickly between writing and scrolling the page. I'm hoping this is a defect or a software issue but the HP FAQ says this:
"If your system supports palm rejection technology, when the active stylus is in use, the touch screen does not respond to input from your hand. Wait approximately 1.5 seconds between using the stylus and using your finger."
If this is functioning as intended, I will need to return the laptop. Is there a way to reduce this delay (ie reg edit)?
Solved! Go to Solution.
03-22-2017 10:10 AM
Hello Customer,
please use the link below for touchscreen issue
http://support.hp.com/in-en/document/c03488148
Regards,
Click on Thumbs up if my post helped you.Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Regards,
Vijay
03-22-2017 10:20 AM
Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
You may find the solution in the below link. Please visit
http://support.hp.com/us-en/product/HP-Spectre-13-ac000-x360-Convertible-PC/14039877/model/15747480
Thanks,
TD
****Please mark Accept As Solution if it solves your problem****
03-22-2017 12:09 PM
Thank you for your help. It's a shame that there is no way to adjust this. If any HP engineers are listening, this would greatly improve pen usability for students and artists. Thankfully I'm still within the return window. All the best!
06-13-2018 04:29 PM
Hi all, as explained by AusKW here
HP did fix the issue for the 15 inch but not the 13 inch, after validating that, they decided to refund; good move HP!
We should do the same.
My best,
Didn't find what you were looking for? Ask the community