USB C does not work for DisplayPort

[toddfran]

Funny, I recently started having the same issue. I have a 4K curved LG monitor I purchased in October 2018. I connected the HDMI and a displayport cable to an HP USB-C docking station. From there I connected to my Spectre X360 15". Everything was working mostly OK. Occasionally the displayport side of the screen would stay black, but eventually come back up. In April the displayport input stopped working. I tried new cables, new docking station, updating all drivers, ran the help assistant, checked the bios, firmware, ETC. My laptop keeps thinking the main monitor is two monitors and only the HDMI input works. I sent my monitor back to LG as well and they found no issues with any ports or the electronics. I still cannot get the displayport to work and I'm growing very frustrated.

[The_Fossette]

@toddfran,

Welcome to the HP Support Community!

I recommend you contact support and they will assist you in this regard.

Here is how you can get in touch with support.

1)Click on this link – www.hp.com/contacthp/

2)Select the product type.

3)Enter the serial number of your device or select let HP detect your product option.

4)Select the country from the drop-down.

5)You should see the HP phone support number or Chat option listed.

Let me know how it goes and you have a great day!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!