-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
7
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
What is your HP Pavilion 15.6 inch Gaming Laptop PC 15-ec2000 (2P6B5AV) ? It could be one of the following machines
For example : HP Pavilion Gaming Laptop 15-ec2015nf .
Your machine should have SAME ports as the above machine. It ONLY has 1 USB 3.1 Gen 1 Type-C™ (Data Transfer Only, 5 Gb/s signaling rate) port which does NOT support Alt mode nor Power Delivery. You can NOT use it to
- Charge your machine,
- Connect to an external monitor with/without hub/dock/adapter
If you wish to connect 2 external monitors (only), you can use
Monitor 1: HDMI direct cable,
Monitor 2: Using a Displaylink Certified USB-A to HDMI adapter such as
Short answer: No, you can't use USB-C port on your machine for "graphics".
Regards..
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
HP Recommended
What is your HP Pavilion 15.6 inch Gaming Laptop PC 15-ec2000 (2P6B5AV) ? It could be one of the following machines
For example : HP Pavilion Gaming Laptop 15-ec2015nf .
Your machine should have SAME ports as the above machine. It ONLY has 1 USB 3.1 Gen 1 Type-C™ (Data Transfer Only, 5 Gb/s signaling rate) port which does NOT support Alt mode nor Power Delivery. You can NOT use it to
- Charge your machine,
- Connect to an external monitor with/without hub/dock/adapter
If you wish to connect 2 external monitors (only), you can use
Monitor 1: HDMI direct cable,
Monitor 2: Using a Displaylink Certified USB-A to HDMI adapter such as
Short answer: No, you can't use USB-C port on your machine for "graphics".
Regards..
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community