Zbook 15 - Screen Calibration!

[Aboammar]

Hi,

I need to calibrate my Zbook 15 display becouse it has slight geen cast and some colors appear greensih .  

I bough X-Rite i1Display Pro but I am not getting a good results.  X-Rite support recomends to adjust the RGB levels and contrast manualy during the profiling process in order to get accuare calibration, but I do not know how to do so in Zbook 15.

Any idea how to adjust the RGB and contrast on the Zbook 15?

Appreciate your help ..

[Riddle_Decipher]

Hi,

You may need to use either the AMD ATI Catalyst control panel OR the Nvidia Control Panel (depending on which graphics card you have) And reset to the default values.

If you need to adjust the RGB, use the below steps:

In dispcalGUI menu>Options enable the "Show advanced options"

For further details on adjustments : http://www.dpreview.com/forums/thread/3940250

[Riddle_Decipher]

Also, if the issue persists, please check on either the CMD (command prompt) or the BIOS (restart and tap on F10 to access) and if you see the green tint, contact hp support on 1800-474-6836, as it could be a LCD failure.

[Aboammar]

Thank you very much for your feedback.

Do you suggest to use DisplayCal instead of the i1Profiler software that came with x-rite i1|Display Pro, or togather?

I am 100% sure that my display is not defected, and it is just a matter of calibration 🙂