High ping [ realtek rtl8822be 802.11ac pcie adapter driver]

[Lazlo]

I somehow found a temporary solution...

If I uninstall and reinstall the driver when starting up, it works perfectly fine..

So it seems for every start up I have to uninstall and reinstall my driver...

Isn't there any better way solving this?

[Lil_Boy_Blue]

Hi

Dunno.

I would access my Modem/Router (192.168.?.1) and see if there is a ping option from it.

Mine can, this removes the PC from the equation.

As to better or alternate drivers I don't know.

Copy and Paste into Notepad,
Save as A2Z.bat
Double click to run.

@Echo THIS MAY HELP TO REPAIR / RECTIFY,
@ECHO VERY, SIMPLE NETWORK DIFFICULTIES.
@ECHO WIRED AND WIRELESS CONFIGURATIONS.
@ECHO THE RESULTS WILL VARY ACCORDING TO
@ECHO YOUR CONFIGURATION AND USER LEVEL.
@ECHO A RE-BOOT MUST BE DONE AFTER DOING
@ECHO SOME OF THE CHECKS OPTIONED BELOW.
@ECHO....................................
:MENU
@ECHO TYPE IN YOUR PREFERRED MENU CHOICE
@ECHO....................................
@ECHO.
@ECHO A - PING_LO Ping test to 127.0.0.1
@ECHO B - PING_TO Pinging out to 8.8.8.8
@ECHO C - GET_IFS Display each Interface
@ECHO D - DNSFLSH Flush out DNS Register
@ECHO E - DNS_REG Register new DNS value
@ECHO F - IPvFOUR Reset to remove errors
@ECHO G - IP_RNEW Force/Renew IP address
@ECHO H - IPv_SIX Reset to remove errors
@ECHO I - NB_STAT NETBIOS -Renew -Repair
@ECHO J - DIS_HEU Disable TCP Heuristics
@ECHO K - SH_ETH0 Display ETH0 interface
@ECHO L - DR_WLAN Drivers WLAN interface
@ECHO M - SH_WLAN Display WLAN interface
@ECHO N - NS_LKUP Shows your Name Server
@ECHO O - GET_MAC Obtain MAC address(es)
@ECHO P - GTMAC-A Create address(es)-TXT
@ECHO Q - IP_CONF Display Network Config
@ECHO R - IPCNF-A All Network Config-TXT
@ECHO S - SYS_SUM System Summary Display
@ECHO T - INFO_32 Shows MSINFO32 Screens
@ECHO U - NETSTAT All Network Statistics
@ECHO V - NSTAT-A Show Network Stats-TXT
@ECHO W - WINSOCK Reset to remove errors
@ECHO X - PROFILE Displays SSID listings
@ECHO Y - WIFIKEY Displays as clear text
@ECHO Z - FINISHD Close this Command Box
@ECHO ...................................
@ECHO OFF
COLOR B1
SET /P M= Press A-Z, and then ENTER:

IF /I %M%==A GOTO PING_LO
IF /I %M%==B GOTO PING_TO
IF /I %M%==C GOTO GET_IFS
IF /I %M%==D GOTO DNSFLSH
IF /I %M%==E GOTO DNS_REG
IF /I %M%==F GOTO IPvFOUR
IF /I %M%==G GOTO IP_RNEW
IF /I %M%==H GOTO IPv_SIX
IF /I %M%==I GOTO NB_STAT
IF /I %M%==J GOTO DIS_HEU
IF /I %M%==K GOTO SH_ETH0
IF /I %M%==L GOTO DR_WLAN
IF /I %M%==M GOTO SH_WLAN
IF /I %M%==N GOTO NS_LKUP
IF /I %M%==O GOTO GET_MAC
IF /I %M%==P GOTO GTMAC-A
IF /I %M%==Q GOTO IP_CONF
IF /I %M%==R GOTO IPCNF-A
IF /I %M%==S GOTO SYS_SUM
IF /I %M%==T GOTO INFO_32
IF /I %M%==U GOTO NETSTAT
IF /I %M%==V GOTO NSTAT-A
IF /I %M%==W GOTO WINSOCK
IF /I %M%==X GOTO PROFILE
IF /I %M%==Y GOTO WIFIKEY
IF /I %M%==Z GOTO FINISHD

:PING_LO
ping LOOPBACK
echo.
GOTO MENU

:PING_TO
ping 13.107.4.52
echo.
GOTO MENU

:GET_IFS
netsh interface ip show interface
echo.
GOTO MENU

:DNSFLSH
ipconfig /flushdns
echo.
GOTO MENU

:DNS_REG
ipconfig /registerdns
echo.
GOTO MENU

:IPvFOUR
netsh int ipv4 reset reset.log
echo.
GOTO MENU

:IP_RNEW
ipconfig /release
pause
ipconfig /renew
echo.
GOTO MENU

:IPv_SIX
netsh int ipv6 reset reset.log
echo.
GOTO MENU

:NB_STAT
nbtstat -RR
echo.
GOTO MENU

:DIS_HEU
netsh int tcp set heuristics disabled
echo.
GOTO MENU

:SH_ETH0
netsh lan show interfaces | more /c
echo.
GOTO MENU

:DR_WLAN
netsh wlan show drivers | more /c
echo.
GOTO MENU

:SH_WLAN
netsh wlan show interfaces | more /c
echo.
GOTO MENU

:NS_LKUP
nslookup /ns
echo.
GOTO MENU

:GET_MAC
getmac | more /c
echo.
GOTO MENU

:GTMAC-A
getmac >> c:\GM.txt
Notepad c:\GM.txt
echo.
GOTO MENU

:IP_CONF
ipconfig -all
echo.
GOTO MENU

:IPCNF-A
ipconfig -all >> C:\IP.txt
Notepad C:\IP.txt
echo.
GOTO MENU

:SYS_SUM
systeminfo
echo.
GOTO MENU

:INFO_32
msinfo32
echo.
GOTO MENU

:NETSTAT
netstat -e -r -s | more /c
echo.
GOTO MENU

:NSTAT-A
netstat -e -r -s >> NetStat.txt
Notepad NetStat.txt
echo.
GOTO MENU

:WINSOCK
netsh winsock reset catalog
echo.
GOTO MENU

:PROFILE
netsh wlan show profiles
echo.
@ECHO PLEASE NOTE any NETWORK-SSID name(s)
@ECHO that you want the PASSPHRASE(S) for.
echo.
GOTO MENU

:WIFIKEY
set /p wkey=Please type in the SSID
Please type in the SSID
netsh wlan show profile name=%wkey% key=clear
echo.
GOTO MENU

:FINISHD
EXIT