• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP ENVY - 17t-ae000 CTO
Microsoft Windows 11

After spending many hours in over a week of not beeing unable to connect to any wifi I am here askig for help.  Background:     Note that my second Hp laptop is running Windows 10 wifi is working fine on the same network and router. 

Checking network requirements

You can’t connect to this network (Wi-Fi). 

Apparently this occurs occasionally and I have tried many of the solutions –

Adapter RTL8852AE Disable, enable, uninstall, install, device manager reports the adapter is working normally. And the version is the latest and current as per Realtek.

Netsh winsock reset, ip reset, ipconfig release, renew, flushdns Network reset etc etc etc. Followed by many restarts and shutdowns. Nothing has changed or fixed the problem.  Wifi was working fine on this laptop on this router and a previous rouer.  Is  there any way to rest wifi networking to original? or any help is appreciated...Rudi

 

4 REPLIES 4
HP Recommended

Hi @RudiF 

 

Welcome to the HP Support Community!

 

Thanks for posting your query! We're here to help you get back up and running.

 

It sounds like you've already tried a thorough set of troubleshooting steps, but your HP ENVY 17t-ae000 CTO still refuses to connect to Wi-Fi. Since your other HP laptop connects fine, the issue seems isolated to this device. Let's go through some additional steps that might help:

 

Step 1: Forget and Reconnect to the Network

  1. Open Settings > Network & Internet > Wi-Fi.
  2. Click Manage Known Networks.
  3. Select your Wi-Fi network and click Forget.
  4. Restart your laptop and reconnect by entering the password.

 

Step 2: Manually Set Up a Static IP

  1. Open Settings > Network & Internet > Wi-Fi.
  2. Click Properties under your Wi-Fi connection.
  3. Scroll down to IP Settings and select Edit.
  4. Change Automatic (DHCP) to Manual.
  5. Enter:
    • IP Address: 192.168.1.150 (or another unused IP)
    • Subnet Mask: 255.255.255.0
    • Gateway: 192.168.1.1 (your router’s IP)
    • DNS: 8.8.8.8 (Google DNS)
  6. Save and restart your laptop.

 

Step 3: Disable IPv6

  1. Open Control Panel > Network and Sharing Center.
  2. Click Change Adapter Settings.
  3. Right-click your Wi-Fi adapter and select Properties.
  4. Uncheck Internet Protocol Version 6 (TCP/IPv6).
  5. Click OK and restart your laptop.

 

Step 4: Reset Network Settings

  1. Open Settings > Network & Internet > Advanced Network Settings.
  2. Click Network Reset and confirm.
  3. Restart your laptop and reconnect to Wi-Fi.

 

Step 5: Try a Different Wi-Fi Band

If your router supports both 2.4GHz and 5GHz, try switching to 2.4GHz in your router settings. Some Realtek adapters struggle with 5GHz connections.

 

Let me know how it goes! 😊

 

If my response helped, please mark it as an Accepted Solution It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

 

Take care, and have an amazing day!

 

Regards, 

Hawks_Eye

I am an HP Employee.

If my response helped, please mark it as an Accepted Solution!  It helps others and spreads support.  Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 
HP Recommended

What is the current version of the WLAN driver?
First try installing sp157102 which the link was given by Mr. @Paul_Tikkanen from this thread:

https://h30434.www3.hp.com/t5/HP-Instant-Ink/Realtek-Semiconductor-Corp-Net-6001-10-353-0/td-p/93702... 

 

Don't forget, below this is turned off and then on.

Screenshot 2025-05-07 225008.png

HP Recommended
  1. Tried the forget network and reconnect before
  2. Static option did not work the router requires a preferred domain name
  3. IPV6 was not enabled
  4. Finally learned how to examine the log ‘wlanreport’ and found 13 security failures. That was the hint I needed. Somehow security changed on the router and all I needed was to set it back to the default. I should have done that almost immediately.

PS: Tech support at MS could have easily done that when he connected to my computer.

But thank you very much for trying to help…Rudi

HP Recommended

Instead of trying 12 things the first thing I should have done was too learn how to look at wlanreport. It told me that security on the router got screwed up. 13 security failures. Thanks for taking the time. Rudi

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.